User manual

user manual
TA-890
TA-890 user manual
Page 11
• MC2 E series
• Lab Gruppen FP series
• Crest Pro series
• QSC Powerlight II series
Digital Controllers
In addition to the Turbosound LMS-D6 and LMS-D26 loudspeaker management systems, the
following digital crossovers have been tested and are recommended for use with Aspect
systems:
• BSS FDS366
• XTA DP224, DP226 and DP428
Aspect Loudspeaker Components
All the drive units have been designed in-house specifically for the Aspect system and are
manufactured exclusively for Turbosound. This means that they are expressly suited to their
intended purpose, and make use of innovative features to ensure premium performance.
Neodymium magnets are used throughout all drive units. This results in higher efficiency,
less power compression and reduced overall weight. Low-mid frequency drivers are
designed to be rear-facing in the enclosure, enabling the heatsink / phase plug to be placed in
the air flow to aid cooling.
TA-890L Low Frequency Enclosure
The TA-890L low frequency enclosure covers
the low frequency range from 35Hz up to 100Hz.
It contains two very high power 15" neodymium
drive units loaded with TurboBass™ devices.
The TA-890L is a very compact enclosure,
identically sized to the TA-890H, and its minimal
size and low weight ensures easy handling. It is
designed to provide beneficial low frequency
coupling when used in multiples. The enclosure
may be ground-stacked or flown using its integral flying hardware.