User manual

user manual
TA-890
TA-890 user manual
Page 35
1. Drop Link
A retractable sliding mechanism that extends downwards to engage in the flygear of the
cabinet below. It is backed with an anti-vibration spring.
2. Swing Latch
A spring-loaded lever that secures the flying chain or the drop link of the cabinet above. Pull
back to locate the drop link, release to engage.
Connecting Flying Chains to the Cabinet
To connect the top chain to the cabinet, pull the swing latch back, insert the cabinet link into
the slot and release the swing latch. Repeat for the second flying chain. A white filled circle
visible in the safety window gives clear visual indication that the link is properly engaged and
that the box is safe to lift.
Figure 1 – insert cabinet link Figure 2 – release swing latch
Connecting Cabinets - ‘A’ System
The optimum method is to stack cabinets in vertical columns underneath the flybar position,
ensuring that the corner locators line up properly. Cabinets can now be linked and pre-
configured.
With one hand, pull back the swing latch at the top of a cabinet while at the same time
releasing the drop link on the cabinet above it using the latch trigger. Use the tilt index to set
the required vertical angles between cabinets. A white circle visible in the drop link window
indicates that the drop link is fully engaged.
Note: DO NOT under any circumstances fly cabinets until you have checked that the safety
indicator is visible on all cabinets.
Repeat this procedure until all cabinets in the column are linked.