Owner's Manual

7
TD-000472-00-A
Using the FX Channel Effect Tab
Go to the FX Channel Effect Tab (From the Input Channel FX tab):
The FX Master Effect tab offers control over advanced Effects functionality.
To Access the FX Master Effect Tab:
This is where you can select which processor is associated with the selected FX mix or channel.
To Select a Processor:
You can also select a processor preset.
To Select an Effect preset:
NOTE: Each processor has user adjustable parameters. Press
Info
then under FX Panels touch
<Eect Name>
for
more information.
To Adjust the Level of the Effect Sent to the Main L/R Output:
Use the FX Master fader to the right of the FX panel to adjust the amount of effect heard in the main speaker system.
To Adjust the Level of the Effect Sent to the Auxiliary Outputs:
Use the "FX Returns to Monitors" knobs to control the amount of effect heard in the monitor speakers.
The FX panel also includes EQ, Preset and Setup tabs. These function in the same way as the corresponding input channel screens.
1
2
3
4
FX Masters
FX 1
Effect
FX
Lush Reverb
None
Cancel
Select an FX Processor:
Touch the FX Processor you wish to assign to this FX Channel.
Preset
Mono 250 Delay
Select a Preset from
one of the three lists.
Recall
Yes
Effect
3.0
Aux 1
3.0
Aux 2
3.0
Aux 3
3.0
Aux 4
3.0
Aux 5
3.0
Aux 6
3.0
Aux 7/8
3.0
Aux 9/10