Owner's Manual

10
TD-000472-00-A
Using Wi-Fi
Make sure that the included USB Wi-Fi adapter is installed in one of the mixer’s USB ports.
IMPORTANT: QSC does not support the use of Wi-Fi adapters other than those included with the mixer or that have been specifi cally
approved by QSC.
The TouchMix App requires iPad iOS version 6.0 or later.
On the TouchMix:
You can leave the Mixer Name and Password as is but it’s probably a good idea to change them. Otherwise, anyone with the TouchMix App can run
your mixer; and you know how musicians love pranks. Speaking of the TouchMix App – you’ll want to get that installed on your iPad or the Wi-Fi set
up is kind of pointless. Visit the App Store and search for QSC TouchMix.
To Change Wi-Fi Settings:
The Mixer Name (Network SSID) can have up to ten characters.
Change the Mixer Name (Network SSID):
The Network Password must be ten digits.
Change the Password:
Now you're ready to connect the iPad to the Mixer's network.
On your iPad
To Connect your iPad: Settings > Wi-Fi > Select the TouchMix network. It's identifi ed by the SSID.
NOTE: If you do not see the TouchMix network after several minutes, reset the TouchMix Network.
1. After selecting the TouchMix SSID, you'll see dialog letting you know the network you're joining is not connected to the Internet. Touch
“Join Anyway”.
2. The next screen is where you enter your Password.
3. When your iPad is connected, touch the SSID Name again. On the details page, turn on Auto-Join.
4. Wait for a minute or two. This gives the iPad and network time to get their act together.
5. Open the TouchMix App.
6. The Link fi eld in the upper right corner of the iPad screen shows the network name, and a green LED. Your iPad is connected.
If the TouchMix App has diffi culty connecting to your mixer, it may be necessary to reset your iPad by holding down the sleep/wake and Home buttons
until the screen turns off and on again.
With a few minor exceptions, the TouchMix App operates identically to the actual mixer. The App and mixer screen selections don’t follow each other
so you can have one section of the mixer being controlled by your tablet while another section is being operated from the mixer’s user interface.
Troubleshooting
Refer to the "Troubleshooting the Wi-Fi/iPad Connection" on page 51 in the TouchMix Reference section.
Menu
Mixer Setup
New Mixer Name
Mixer Name (Network SSID):
1234567890
Network Password:
Menu
Mixer Setup
Reset Network