Owner's Manual

TD-000472-00-A

Aux Overview

Provides an overview of Aux Sends for all Input channels and FX Mixes, along with the Aux Master faders for each Aux mix.

All aux sends, pan controls, and master fader levels may be adjusted by touching to select and using the Master Encoder.

Menu Press

Aux Overview

Select an

Input Bank

Aux

Overview

Inputs 1-8

1. Only

Input

and

FX Master

banks are selectable on the Nav Strip while in

the Aux Overview.

2. Each

column

(In 1, In 2) represents a channel, and lists the channel’s Aux

Sends and pan controls.

NOTE:

If an input has been given a name, the name will be

displayed as the column heading. Touch the Select (name)

button to navigate to the input channel’s controls.

3. Each

row

represents an

Aux mix

, the name of the mix is displayed in the

ﬁ rst column and with the Master fader..

Pre/Post Button

– Takes you to the Aux Setup screen to change the

pickoff point for the Aux mix. Pre is before the Channel fader, Post is after.

Aux Master Fader

– Adjusts the overall level of the mix.

Stereo Aux Master Slider

– A single slider is provided for a stereo

pair.

Pan Control Slider

– Pans the input between the left and right sides

of a stereo aux mix.

NOTE:

If an Aux output is given a user deﬁ ned name, that

name will be displayed above the Aux Master.

— Figure 36 —