Owner's Manual

TD-000472-00-A

Phantom Power

Supplies +48 VDC output to Inputs 1-16.

Phantom power is not available on the 1/4” phone jack connectors of channels 13 – 16. Phantom power may be switched on and off independently

for each

channel.

Press

Touch Mic

Phantom

Mic Phantom

Input Selection On

– Touch the Input channel name button, or the

corresponding XLR icon to turn +48V on or off. Red indicates on.

Input Selection Off

– Touch the Input channel name button, or the

corresponding XLR icon to turn +48V off. Gray indicates off.

In addition, Phantom power may be switched on and off from the Setup

screen of each input channel.

Phones and Monitor

Phones and Monitor level control

Press

Phones

Monitor

Press

Monitor

Phones (1) and Monitor (2) Level

– Controls the level of the Cue signal on

the Phones and Monitor outputs.

NOTE:

By default, no audio signal is sent to the Phones / Monitor Outputs.

To send audio channel signals (including Main LR) to the Phones / Monitor

Outputs. Enable the Cue button for the channels you want to listen to.

— Figure 49 —

— Figure 50 —