Owner's Manual

53
TD-000472-00-A
DCA Groups
DCA Groups allow you to mute and control the signal level of channels assigned to it. The DCA does not move the faders or change the mute state of
channels assigned to it.
Press
Home
DCA 2
DCA Groups
Touch the
DCA Bank
You can also access the DCA Groups screen by touching Menu > DCA Groups,
or assign a DCA Group from the channel Setup screens.
About DCA Groups
• When a channel is in one or more DCA Groups, the output of that channel
is equal to the sum of the DCA fader settings and channel fader settings.
• When a channel is in one or more DCA Groups, the channel and all the DCA
Groups must be unmuted for audio to pass. The same rule applies when a
channel is in a DCA, and Mute Group – all must be unmuted for audio to pass.
1. DCA Select Button – Selects the associated DCA group for adding or
removing channels.
2. DCA System Name Label – This name does not change.
3. User-defi ned Name Field – Touch the name fi eld to display a keyboard
that may be used to enter a name for the DCA Group.
4. Clear Button – Clears all assignments from the selected DCA Group.
5. Assignment Buttons – Touch one of the channel Assignment buttons
to add the channel to the selected DCA Group. You can assign all channel
types except DCAs.
Mute Groups
Mute Groups allow you to mute a group of assigned channels, at the same time, by pressing the Mute Group mute button.
Press Mute
Groups
Mute
Groups
About Mute Groups
When a channel is in one or more Mute Groups, all Mute Groups containing
the same channel and the Channel Mute itself, must be unmuted for audio
to pass.
Mute Groups Mute Screen
1. Edit Button – Touch the Edit button to add or remove channels from
Mute Groups.
2. Mute Group Buttons – From the Mute Groups screen you can mute or
unmute any of the eight Mute Groups.
— Figure 54 —
1
5
4
2
3
— Figure 55 —
1
2