Owner's Manual

58
TD-000472-00-A
Recording Setup
Recall, initiate, and manage recording sessions.
Press
Record / Play
Record/
Play
Session Naming here
New / Recall Session:
Touch
New / Recall
1.
New Session Button – Displays a keyboard used to enter a name and
initiate a new session.
2. Current Session Label – Displays the name of the currently active
recording/playback session.
NOTE: All session names must be in upper-case letters.
The session you want to rename must be the current session.
3. Rename Button – Touch the Rename button to change the name of the
current session.
4. USB Sessions List – Displays a list of recording sessions available on the
USB device connected to the mixer. Select a session to Recall or Rename
5. Record Pick-off Point Switch –
• Pre – Recorded signal is taken before the channel EQ, compressor and
gate.
• Post – Recorded signal is taken after channel EQ, compressor and gate. Recall Session Button – Loads the session selected in the USB Sessions
window.
NOTE: To return to the main Record / Play screen, press the Home button.
— Figure 61 —
3
2
5
1
4
6