User Manual

43
TD-000472-01-C
Output Channel – Setup / Delay
Output Channel Setup provides control of various functions that apply specifically to a single output channel.
Home Select the Aux
Bank
Select
Aux
Select
Main
OR
Select
Setup Tab
Setup
Aux Outputs
Aux 1 Main
or
Refer to — Figure 36
1. Setup Tab – Selects the Setup screen
2. Link Button (For TouchMix-16, Aux Channels 1-6 only) (For TouchMix-8 Aux Channels
1-4 only) – Links adjacent channels. The odd numbered channel settings are copied
to the even numbered channel. Pan settings are mirrored. Only odd > even linking is
supported – even > odd linking is not.
3. Channel Label – The system name for the channel. This name does not change.
4. Name Field (For Aux Channels Only) – Touch the Name to display a keyboard that may
be used to enter a name for the channel.
5. Delay In Button – Engages or disengages the Delay.
6. GXD Amp Settings Button – Click this button to determine the best settings for your
QSC GXD amplifier. Refer to Output Channel – QSC GXD Amplifier Settings on page
45 for details.
7. Delay Knob – Sets the output delay. Readouts are provided in milliseconds, feet, and
meters.
8. Speaker Settings Button – Click this button to determine the best settings for your QSC K Series, KW Series, and KLA Series Loudspeakers. Refer
to Output Channel – Speaker Settings on page 44 for details.
9. Assign To – Touch this button to assign the output of this channel to the Main L/R speakers. You must set the Aux Sends on all input channels you
want in this mix.
10. Aux Pick-Off Switch – This setting is for all Aux Sends to the selected Aux Output Channel. Determines where the aux signal is taken. The
selections are: Pre Fdr/ Post Fdr / Pre Dyn / Pre All. Pre Fdr is most commonly used for monitors.
11. Mute Group Assignment Buttons – Select the Mute Groups this channel is to be part of. User-assigned names display on the buttons. See the
Mute Groups topic.
12. DCA Group Assignment Buttons – Select the DCA Groups this channel is to be part of. User-assigned names display on the buttons. See the
DCA Groups topic.
— Figure 36 —
9
1
3
4
2
5
6
7
8
12
11
10