User Manual

66
TD-000472-01-C
Recording Setup
Recall, initiate, and manage recording sessions.
Press
Record / Play
Session Naming here
New / Recall Session:
Record/
Play
Touch
New / Recall
Refer to — Figure 68
1. New Session Button – Displays a keyboard used to enter a name and initiate a
new session.
2. Current Session Label – Displays the name of the currently active recording/
playback session.
NOTE: All session names must be in upper-case letters.
The session you want to rename must be the current session.
3. Rename Button – Touch the Rename button to change the name of the
current session.
4. USB Sessions List – Displays a list of recording sessions available on the USB
device connected to the mixer. Select a session to Recall or Rename
5. Record Pick-off Point Switch
• Pre – Recorded signal is taken before the channel EQ, compressor and gate.
• Post – Recorded signal is taken after channel EQ, compressor and gate.
6. Recall Session Button – Loads the session selected in the USB Sessions window.
NOTE: To return to the main Record / Play screen, press the Home button.
— Figure 68 —
3
2
5
1
4
6