User Manual

67
TD-000472-01-C
2-Channel − Playback and Record
The Main L/R, Aux 7/8, or 9/10 can be recorded then played back over the Main L/R Outputs.
Press
Home
Stereo In/2-Trk
2-Trk PB or 2-Trk Rec
Select the
2-Trk Bank
Touch the
Select Button
2-Track Recording Setup
Refer to — Figure 69
1.
Source Select Buttons
– Select the source for 2-Track recording. Main
L/R, Aux 7/8 or Aux 9/10. (TouchMix-8 only Main L/R)
2.
Record Pick-off Point Switch
– Determines if the recorded audio is
affected by the channel EQ and Dynamics (Post), or is not affected by the
channel EQ and Dynamics (Pre).
3.
Arm to record Button
– When engaged, the source channels you
selected are recorded when recording begins. This button is also available
on the Record/Play screen.
2-Track Playback EQ
Refer to — Figure 70
1.
EQ Graph
– A graphic representation of the EQ settings.
2.
Low Cut Button
– Engages / disengages the filter. This filter cuts
frequencies below the frequency set by the Freq control.
3.
High and Low Shelf Filter (1, 2) Buttons
– Engages / disengages the
associated Shelf Filter.
4.
Gain Knob
– Adjusts the gain of the associated shelf filter over a range of
-15 dB to +15 dB.
5.
Frequency Knob
– Sets the center, or shelving, frequency of the
associated EQ band.
6.
Reset Button
– Sets all the EQ controls to their factory default position.
7.
EQ In Button
– Engages the equalizer.
— Figure 69 —
3
1
2
— Figure 70 —
3
1
2
4
5
6
7