Owner's Manual
26
TD-000472-00-A
Input Channel
Trim
The Trim (gain) control sets the level of the analog input signal just before conversion to digital. The Trim controls are not available on the iPad App.
IMPORTANT:
Proper gain trim adjustment prevents clipping, improves signal-to-noise performance, and allows preset compression
and gate dynamics to function as intended.
The following controls and indicators are used to set the input gain Trim.
Refer to — Figure 16.
1.
Trim Controls 1 Through 16
– These are mechanical controls found
on the TouchMix mixing surface.
2.
Nav Strip
– Touch to select. For the TouchMix-16, the fi rst two selectors
are for Input channels 1–8, and 9–16. The TouchMix-8 uses the fi rst
selector for Input channels 1–8. The red line in Inputs 1-8 selector is
a clip indication that is persistent until cleared. When you clear a clip
indication, it is cleared only for the device (iPad or TouchMix) on which
you cleared it.
3.
Input Channel Fader
– Adjusts the output of the channel to the Main
L/R outputs.
4.
Level Meter
– Indicating that the signal level in the channel is below
unity. If input gain trim is properly adjusted, this is what you will see
when the source is playing somewhat below its average level
5.
Level Meter
– Indicating that the signal level in the channel is at unity.
If input gain trim is properly adjusted, this is what you will see when the
source is playing at its average level.
6.
Level Meter
– Indicating that the signal level in the channel is above
unity. If input gain trim is properly adjusted, this is what you will see when the source is playing somewhat above its average level.
7.
Level Meter
– Indicating that the channel is clipping. This is an indication the mixer’s input gain or the source’s output level needs to be reduced.
The meter in the Nav Strip stays red until you touch Clear Clip (on the Menu screen) or press User button U2.
Home Select an
Input Bank
Trim
Inputs 1-8
1
— Figure 16 —
2
7
4
5
6
Trim Trim Trim Trim Trim Trim Trim Trim
12345678
9
10 11 12 13 14 15 16
1
3