Owner's Manual
31
TD-000472-00-A
Pitch Correct
Refer to — Figure 22.
Pitch Correct (available on Input channels 1 through 16) shifts the frequency of an input signal to match the nearest “correct” musical pitch. The mixer
has only one Pitch Corrector and it can be assigned to only one channel at a time.
Home
FX Masters
Select FX
Channel
In 2
FX
Inputs 1-8
Select
Pitch Shift
Select Effect
1.
Pitch Correct Enable Button
– Assigns and enables/disables Pitch
Correct to the currently selected channel.
2.
Blend Knob
– Sets the ratio of uncorrected (Dry) to corrected (Wet)
signal. When fully clockwise, only corrected signal will be heard. When
fully counter clockwise, only the original signal will be heard. Intermediate
settings will result in a doubling effect.
3.
Key Knob
– Selects a key for the pitch corrector to use in determining
what the target note is. If “None” is selected, the Pitch Corrector will target
the nearest chromatic pitch.
4.
Correct Rate Knob
– determines how quickly the pitch is corrected
— Figure 22 —
1
42 3
None E A
CF
A/B
C/D F/G
B
DG
D/E G/A