Owner's Manual

TD-000472-00-A

Filters

Available on the Main L/R and Aux 1 – 6 outputs, these narrow, cut-only ﬁ lters are useful for dealing with feedback.

Home Select the

Aux Bank

Touch a

Select Button

Select

Filters Tab

Filter

Aux Outputs

Aux 1

Main

Filters Tab

– Selects the Filters screen

Filter In Buttons

– Engages a single Filter.

Lo Cut

– Attenuates, or “cuts” frequencies below this frequency setting.

Range is 20 Hz to 2 kHz. The slope of this ﬁ lter is 18 dB/octave.

Graph

– Graphic representation of engaged ﬁ lters.

• Vertical scale = dB

• Horizontal scale = frequency

Hi Cut

– Attenuates, or “cuts” frequencies above this frequency setting.

Range is 200 Hz to 20 kHz. The slope of this ﬁ lter is 18 dB/octave.

Freq Knob

– Sets the center frequency of a ﬁ lter.

Cut Knob

– Sets amount of Cut (or attenuation) for a notch ﬁ lter.

NOTE:

Aux Outputs 7/8 & 9/10 have only low- and

high-cut ﬁ lters.

Filters In Button

– Enables / disables individual ﬁ lter engagement.

Reset Button

– Sets all the Filter controls to their factory default position.

— Figure 32 —

8 9