Owner's Manual

TD-000472-00-A

Setup

Output Channel Setup provides control of various functions that apply speciﬁ cally to a single output channel.

Home Select the

Aux Bank

Touch a

Select Button

Select

Setup Tab

Setup

Aux Outputs

Aux 1

Main

Setup Tab

– Selects the Setup screen

Link Button

(For Aux Channels 1-6 Only) – Links adjacent channels. The

odd numbered channel settings are copied to the even numbered channel.

Pan settings are mirrored. Only odd > even linking is supported – even >

odd linking is not.

Channel Label

– The system name for the channel. This name does not

change.

Name Field

(For Aux Channels Only) – Touch the Name to display a

keyboard that may be used to enter a name for the channel.

Delay In Button

– Engages or disengages the Delay.

Delay Knob

– Sets the output delay. Readouts are provided in

milliseconds, feet, and meters.

View Settings Button

– Click this button to determine the best settings

for your QSC K Series, KW Series, and KLA Series Loudspeakers. Refer to

the QSC Speaker Settings topic for details.

Pre/Post Fader Switch

– This setting is for all Aux Sends to the selected

Aux Output Channel. Determines if the Aux signal level is not affected by the channel fader (Pre), or is affected by the channel fader (Post). Pre is

most commonly used for monitors.

Mute Group Assignment Buttons

– Select the Mute Groups this channel is to be part of. User-assigned names display on the buttons. See the

Mute Groups topic.

10.

DCA Group Assignment Buttons

– Select the DCA Groups this channel is to be part of. User-assigned names display on the buttons. See the

DCA Groups topic.

— Figure 34 —