Owner's Manual
50
TD-000472-00-A
Mixer Setup
Global and Utility Functions
Press
Menu
Menu
Mixer
Setup
Press
Mixer Setup
NOTE:
— Figure 51 refers to the TouchMix, — Figure 52 refers to the iPad App.
1.
Display Brightness Knob
– Controls the brightness of the LCD screen and the illuminated buttons on the TouchMix.
2.
Solo Mode Switch
– Changes the Cue pick-off point to pre-fader listen (PFL), or after-fader listen (AFL).
3.
Sample Rate Switch
– Selects the sample frequency (bit rate) for the mixer. Most relevant for recording. Typically, 44100 is used for audio CD,
and 48000 for audio with video.
4.
Demo Mode Switch
– Demo mode provides a slide show that highlights some of the TouchMix features.
5.
Clear Storage Button
– Deletes all user-defi ned presets and scenes from the mixer. Does not delete presets or scenes stored on a USB device.
6.
Software Version Label
– Displays the version number of the currently installed fi rmware.
7.
Upgrade Button
– When QSC makes an update to the TouchMix fi rmware, you can download it from the QSC website and onto a USB device.
After inserting the USB device into the TouchMix, touch the Upgrade button to start the process. Follow the instructions on screen.
8.
End User License Agreement
– Please read this agreement before using your TouchMix.
9.
Save System Log to USB Button
– The TouchMix saves various events that take place when the TouchMix is on. This log can be saved to a USB
device then sent to QSC Technical Support for use in troubleshooting TouchMix system errors. This fi le requires special software to read it.
10.
Reset Network Button
– Pressing this button reloads the Wi-Fi network driver. Use this if you are having trouble connecting your iPad(s). If any
iPads are connected, they must be reconnected after the reset.
11.
Mixer Name (Network SSID) Field
– Displays the name of the mixer’s network. Touch the Name to display a keyboard and enter a new SSID.
12.
Network Password Field
– Displays the password for the network to which your iPad connects. Touch the Name to display a keyboard that may
be used to enter a Password for the network. The password must be numeric; 0-9 only, and must be 10 characters.
13.
Reset Mixer Button
– Restores factory settings but retains user presets, scenes, SSID and Network Password.
— Figure 51 —
End User License Agreement Save System Log to USB
Reset Network
2
13
3
5
10
4
1
6
8
9
11 12
7
— Figure 52 —
2
8
3
5
13