Owner's Manual

TD-000472-00-A

FX Wizard

The FX Wizard aids in adding FX to channels and routing those FX to monitors so your mixes have depth and sound fantastic!

Press

Wizard

Touch FX

Wizard

FX1, 2, 3, 4 Buttons

– Selects which of the four FX mixes you want to

work with.

NOTE:

The Source, Type, and FX Preset windows provide a

means of selecting an Effect based on what the source is.

If any of the lists ﬁ ll the window, ﬂ ick up on the list to show

more selections.

Source List

– Use the Source window to select the source

instrument category.

Type List

– Use the Type windows to select the type of instrument you

want to send to the Effect processor.

At this point you have narrowed your selection enough for TouchMix to

provide a list of recommended Effect presets.

FX Preset List

– Use the FX Preset window to select the Effect

and variation.

For example, in the FX Preset window if you see the letter “D”, it refers to the Dense Reverb Effect, and the text following the letter indicates the

Preset (variation) of the Dense Reverb.

Recall Button

– Loads the effect that has been selected in the Source, Type and FX Style windows.

Clear Button

– Un-assigns all the inputs and outputs.

Select Inputs to feed

FX 1 Mono 250 Delay

Label

– Each input channel is represented by a button. Touch one or more of these buttons to feed

the input channel to the selected Effect.

Cue Button

– Touch Cue above the FX fader to hear the output of the selected effect.

Select Aux Output Buttons

– Each Aux Output is represented by a button. Touch one or more of these buttons to send the effect output to the

associated Aux Output.

— Figure 58 —