User's Manual
Table Of Contents
- Maintenance and Repair
- TouchMix™ How To
- Register and Update
- TouchMix-30 Pro Package Contents
- TouchMix-8 / TouchMix-16 Package Contents
- About This Manual
- Getting Started
- Effects
- Mute Groups
- DCA Groups
- Sub Groups (TouchMix-30 Pro only)
- Using Auxiliaries as Sub Groups (TouchMix-8 and 16 only)
- Matrix Mixing
- Save Your Work as a Scene
- Sound Check
- Anti-Feedback System
- Real Time Analyzer (RTA)
- Mutes
- Copy & Paste
- Patch Matrix (TouchMix-30 Pro only)
- Room Tuning Wizard
- User Buttons
- MIDI Control
- Security
- Monitor (TouchMix-30 Pro only)
- Monitor (TouchMix-16 only)
- Solo In Place (SIP) (TouchMix-30 Pro only)
- TouchMix Reference
- Getting Started
- Top Panel and Remote-Device Controls (TouchMix-30 Pro)
- Rear Panel (TouchMix-30 Pro)
- Right Side of the TouchMix-16 Mixing Surface
- Right Side of the TouchMix-8 Mixing Surface
- Rear Panel (TouchMix-16)
- Rear Panel (TouchMix-8)
- TouchMix-30 Pro Specifications
- TouchMix-8 and TouchMix-16 Specifications
- TouchMix™ Feature List
- Nav Strip
- Input Channels
- Output Channels
- Sub Groups (TouchMix-30 Pro only)
- 2‑Trk Playback
- FX Masters
- Wizards
- FX Processor
- Security
- Miscellaneous Features
- Mute Groups
- About Mute Groups
- Mute Groups Screen
- Mute Group Edit Screen
- Record / Playback (Multitrack USB Drive)
- 2‑Trk − Recording
- DAW – Record / Playback (TouchMix-30 Pro only)
- Real-time Analyzer (RTA)
- Scenes
- Channel Safe
- Auto Mixer TouchMix-30 Pro
- External Control Surfaces - TouchMix-30 Pro
- Custom Fader Banks - TouchMix-30 Pro
- DCA Group Assignments
- MIDI
- Talkback / Noise
- TouchMix Wi-Fi Control
- Getting Started
- TouchMix Dimensions
- TouchMix Block Diagram
- Contact QSC
42
1001108-01-F
•
Gain
– Displays and sets the overall output gain to makeup any loss after the signal is compressed.
20.
Gate –
To adjust the following parameters, select the field then use the Master encoder or the up/down nudge buttons on a mobile device.
•
Gate
– Engages or disengages the Gate.
•
Threshold
– Displays and sets the signal level at which the Gate allows audio to pass.
•
Attack
– Displays and sets how quickly the gate reacts to a signal that exceeds the threshold.
•
Release
– Displays and sets how quickly the Gate attenuates the audio when signal falls belowthreshold.
•
Attenuation
– Displays and sets the amount of attenuation applied to the output when the signal is below the Threshold.
•
Hold
– Displays and sets the minimum time the Gate stays open once it is opened, and the length of time the Gate stays open after the
input level drops below the Threshold.
21.
FX Sends
–
• Displays the system numbers and user-defined names for the FXchannels.
• Adjustable sliders send signal from this channel to the associated FX processors.
22.
Aux Channel Link icon
– Indicates the two channels are linked.
23.
Aux Pan control –
When two channels are linked, the even number send slider becomes a pan control..
24.
M
– Indicates if the channel send to the Aux mix ismuted.