User's Manual
Table Of Contents
- Maintenance and Repair
- TouchMix™ How To
- Register and Update
- TouchMix-30 Pro Package Contents
- TouchMix-8 / TouchMix-16 Package Contents
- About This Manual
- Getting Started
- Effects
- Mute Groups
- DCA Groups
- Sub Groups (TouchMix-30 Pro only)
- Using Auxiliaries as Sub Groups (TouchMix-8 and 16 only)
- Matrix Mixing
- Save Your Work as a Scene
- Sound Check
- Anti-Feedback System
- Real Time Analyzer (RTA)
- Mutes
- Copy & Paste
- Patch Matrix (TouchMix-30 Pro only)
- Room Tuning Wizard
- User Buttons
- MIDI Control
- Security
- Monitor (TouchMix-30 Pro only)
- Monitor (TouchMix-16 only)
- Solo In Place (SIP) (TouchMix-30 Pro only)
- TouchMix Reference
- Getting Started
- Top Panel and Remote-Device Controls (TouchMix-30 Pro)
- Rear Panel (TouchMix-30 Pro)
- Right Side of the TouchMix-16 Mixing Surface
- Right Side of the TouchMix-8 Mixing Surface
- Rear Panel (TouchMix-16)
- Rear Panel (TouchMix-8)
- TouchMix-30 Pro Specifications
- TouchMix-8 and TouchMix-16 Specifications
- TouchMix™ Feature List
- Nav Strip
- Input Channels
- Output Channels
- Sub Groups (TouchMix-30 Pro only)
- 2‑Trk Playback
- FX Masters
- Wizards
- FX Processor
- Security
- Miscellaneous Features
- Mute Groups
- About Mute Groups
- Mute Groups Screen
- Mute Group Edit Screen
- Record / Playback (Multitrack USB Drive)
- 2‑Trk − Recording
- DAW – Record / Playback (TouchMix-30 Pro only)
- Real-time Analyzer (RTA)
- Scenes
- Channel Safe
- Auto Mixer TouchMix-30 Pro
- External Control Surfaces - TouchMix-30 Pro
- Custom Fader Banks - TouchMix-30 Pro
- DCA Group Assignments
- MIDI
- Talkback / Noise
- TouchMix Wi-Fi Control
- Getting Started
- TouchMix Dimensions
- TouchMix Block Diagram
- Contact QSC
87
1001108-01-F
FX P – L R
Reverb presets with an “L” suffix use a DSP reverb
model with a more “lush” character.
1.
Effect –
Name of the current Effect. Touch to
select an Effect Type.
2.
Preset –
Name of the current preset. Touch
to access the library of Presets.
3.
Simple button –
Turns Simple mode on
and off. Hides all but the essential controls on
the selected FX.
Not present on Mono
and Stereo Delay effects.
4.
Reset button –
Returns processor and
Aux Send controls to default settings.
5.
Input meter –
Displays the level of
incoming, mono audio signal.
6.
Output meter –
Displays the stereo level
of the processed output signal.
7.
Low Cut
– Attenuates, or “cuts” frequencies
below the set frequency. Range is 20Hz to
2kHz.
8.
Hi Cut –
Attenuates, or “cuts” frequencies
above the set frequency. Range is 200 Hz
to20kHz.
9.
Size –
Adjusts dimension of the simulated
acoustic space inmeters.
10.
Pre Delay –
Sets the time interval between
input signal and firstreflection
11.
Low Reverb –
Adjusts the reverb decay time for frequencies below the crossover frequency.
12.
Crossover –
Sets the crossover point for the Low Reverb Time and the High Reverb Time.
13.
High Reverb –
Adjusts the reverb decay time for frequencies above the crossover frequency.
14.
Diffusion –
Adjusts the early reflections to simulate a more or less complex reflective acoustic surface.
15.
FX Returns to Monitors
:
a.
M –
Indicates the Aux Send for the Effect is muted from the Auxes tab.
b. Send Slider – Sets the level of the Effect to the Aux output.
c. Link icon – Indicates the Auxes are linked.
d. Aux Pan control – Pans between the two linked Auxes.
Home
Touch the
FX Masters
Bank
Touch an
FX Channel
Touch the
Effect Tab
Touch Effect
Pull-Down
Touch
Lush Reverb
Joe’s Monitor
Aux 1
Aux 2
Aux 2
Aux 3
Aux 3
Aux 4
Aux 4
Aux 5
Aux 5
Aux 6
Aux 6
Aux 7
Aux 7
Aux 8
Aux 8
Aux 9
Aux 9
Aux 10
Aux 10
Aux 11
Aux 11
Aux 12
Aux 12
Aux 13
Aux 13
Aux 14
Aux 14
Overview
Eect Auxes Setup
EQ
Presets
Default
Scene:
Main Mix
L/R
Prev
Next
48
L
F
LR
∞
∞
Cue
L
C
R
FX
1
10
5
u
5
10
20
0
40
10
10
5
u
5
10
20
0
40
10
FX 1 Main
Cue
Main
L/R
Mute Mute
FX 1
Eect
Inputs 1-8
FX Masters
+
+
Lush
Reverb
Eect
None
+
2
4
5
1
109
7
8
11
6
12
3
14
M
15
a
b
c
d
13