English ………………………………………………………………………………………………………………………………………………………………………………………. ……………………………. ……………………………. ………………………………… ......................................................................................................................................................................................................................................................................................... .......... 0 Racing.Qstarz.
GPS Lap Timer English …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… LT-6000S GPS Lap Timer User’s Guide 1) 2) 3) 4) 5) 6) 7) 8) 9) A.
English ………………………………………………………………………………………………………………………………………………………………………………………. ……………………………. ……………………………. ………………………………… Main functions: Multi-Function Device – Performance Timer, Lap Timer, Rally and GPS Logger eXtreme 10Hz Log to record 10 times per second 2.
GPS Lap Timer English …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… Raise beeper function to notice some status of device IPX-3 water resistance and Firmware upgradable Less than 15-Sec.
English ………………………………………………………………………………………………………………………………………………………………………………………. ……………………………. ……………………………. ………………………………… For Charging device 7. -Mini USB port For Data download to PC -Reset button For Firmware Upgrade 8. External GPS Antenna Jack For connecting optional External GPS Antenna with MCX plug C.
GPS Lap Timer English …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… Orange When device is under charging mode, the Orange LED will be steady ON. After device battery is fully charged, the Orange LED will be OFF. When device is under Screen power saving mode (backlight off), Green LED will Green flash once per 1 second. E. Safety Notice Note: Please read this section carefully before start operating the 6000S.
English ………………………………………………………………………………………………………………………………………………………………………………………. ……………………………. ……………………………. ………………………………… Note: To avoid damage to the battery, please do not overcharge the battery for more than 10 hours. The battery will stop charging if it’s overheated for safety reason. G. Device bracket mounting (1) 6000S mounting bracket with provided screw. (2) Line up the bracket with the screw hole. (3) Secure the mounting bracket in place with the provided screw. H.
GPS Lap Timer English …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… 3. Snap the mounting bracket onto the suction cup arm. 4. Please make sure the 6000S is installed as straight and vertical as possible. So the internal 3-axis G-Force sensor is able to perform more accurately.
English ………………………………………………………………………………………………………………………………………………………………………………………. ……………………………. ……………………………. ………………………………… If you are using the 6000S for the first time or you haven’t been use it for a while, it will need to be left for 10-15 minutes to make the GPS signal accurate and steady. Install external GPS antenna (Optional Accessory) 6000S has built-in gps antenna, you also can increase the GPS precision and reception quality with external gps antenna.
GPS Lap Timer English …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… About the GPS The GPS is operated by the government of United States, which is solely responsible for its accuracy and maintenance. The accuracy of location data can be affected by adjustments to GPS satellites made by United States government. Quality of GPS signals may be affected by your location, building, natural obstacles, and weather conditions.
English ………………………………………………………………………………………………………………………………………………………………………………………. ……………………………. ……………………………. ………………………………… 8. I-1. Setting Mode Drag Race mode The Drag race mode is to measure your vehicle’s acceleration and braking’s performance, 3 pre-defined Profiles (0-100km/h, 400m, 10sec) are stored in 6000S. You can also define your own performance tests or deceleration criteria by selecting Custom profile.
GPS Lap Timer English …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… Press Start button to start perform your run. Once the screen show ”Ready” the timer will automatically start when it detects the car starts moving, and stops it when your car is passing Profile condition (100km/h, 400m or 10sec). *Do not to run these tests on the public roads! I-2.
English ………………………………………………………………………………………………………………………………………………………………………………………. ……………………………. ……………………………. ………………………………… Custom profile: User can custom your preference by selecting the comparison lap (best or last) and field option display for lap timing. - Select one of the profiles you want to test, press Next button. 6000S will automatically detect and display the nearby start/finish line coordinates of the track based on the track list database within 6000S.
GPS Lap Timer English …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… Simple Lap: Just press the Load User Track: Load the track which you created before in this device. Load Shared Track: Load the track which you exported from QRacing software. Create Closed Track: You can create Start/Finish lines and Splits. Start/Finish line is at the same place. Create Open Track: You can create Start line, Splits and Finish line.
English ………………………………………………………………………………………………………………………………………………………………………………………. ……………………………. ……………………………. ………………………………… Note1: The vehicle must be moving for better precision when setting the Start/Finish line. Note2: In some cases it may not be feasible or safe to add Start/Finish Splits line while driving. Users can use alternative way by QRacing software to edit the Start/Finish and Split lines, then export them to 6000S for race (Please see K-2 Edit Beacon).
GPS Lap Timer English …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… share it with other users. - Beacon Width: Beacon is commonly referred to as the virtual start/finish or split lines. The default beacon width is set to 50 meters (25m from each side of the vehicle) and the Beacon line is placed in a straight angle to your current bearing (see below picture), you may adjust the beacon width according to your track width.
English ………………………………………………………………………………………………………………………………………………………………………………………. ……………………………. ……………………………. ………………………………… If you were going faster than comparison lap (best or last), the lap time will be shown in Green background. Or if you were going slower, and the run time will be shown in Red background. The timing difference between your current lap and your best or last lap will be shown at the bottom of the screen.
GPS Lap Timer English …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… Press button to change display screen Lap Time screen for Circuit Race mode: (tested with Lap with Splits) For Lap with Splits, if you were passing spilt and going faster than the same spilt of compared lap, the Rolling time and Split timing difference will be shown in Green background.
English ………………………………………………………………………………………………………………………………………………………………………………………. ……………………………. ……………………………. ………………………………… Sectors: The time from one split point to the next split point. Press the button to navigate and view each sector’s time. Splits: The cumulative time from start point to a split Point. Press the button to navigate and view each split’s time. ..........................................................................................................................................
GPS Lap Timer English …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… Split Speed: The speed when across the split line. Speed & G Value: Display the session lap’s Max/Min/Avg Velocity (Speed) and Max G Value. You can select the lap and press Enter button to view lap detail. Press the button to swap analysis and track pages. ……………………………………………………………………………………………………………………………………………………………………………………….
English ………………………………………………………………………………………………………………………………………………………………………………………. ……………………………. ……………………………. ………………………………… I-3. Rally Race Mode The Recce in Rally Race mode allows user to log their rally course as reference to create their rally stage notes, or pacenotes. Press button to start Recce session. 6000S will log the Rally course and display the Trip information on the screen; user can press to set Split (or checkpoint).
GPS Lap Timer English …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… GPS logger mode I-4 You can also use 6000S as a GPS Data logger to record your travel route. Session name: The system will automatically create the Log name with YYMMDDXX format. Time: Select the log frequency (1Hz, 5Hz, 10Hz or user define 0~99 seconds) Distance: Select to log by distance (0~9999 meters). Speed: Select to log by speed (0~999 kph).
English ………………………………………………………………………………………………………………………………………………………………………………………. ……………………………. ……………………………. ………………………………… Press =Menu Button can view the selected Session Detail, Property, Delete session or Export track. Track export file format can be selected with KML, CSV or GPX file. After track export succeeded, the exported file can be found on the device memory of the 6000S\Exports folder. I-6. Application Mode In Application mode, you will be able to perform 6000S as G-meter or Demo display.
GPS Lap Timer English …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… I-7. GPS Mode In GPS mode, user can check gps satellite status or perform gps cold start. GPS Status: 6000S will show a screen, which shows which satellites are in use. The bar graphs show the strength of the satellites that the GPS has acquired. Press the button to see GPS info.
English ………………………………………………………………………………………………………………………………………………………………………………………. ……………………………. ……………………………. ………………………………… to use after cold start is completed. I-8. Setting mode In the Setting mode, option such as Unit of Measure (mph/kph), Backlight, Brightness, Time Zone, Time format, Daylight Saving and Language options can be adjusted, or reset device to factory default. Language: Select the desired language and press Enter Button, and wait until the language loading is completed.
GPS Lap Timer English …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… firmware: Step1. Turn OFF the device and connect to the USB port of computer. 6000S will enter into USB ACCESS MODE automatically. Step2. Extract the downloaded firmware file Q6000S.qst and copy to the root directory of the device memory. Step3. Unplug the USB cable and press both “ENTER” and “POWER” buttons at the same time until the “CHECK FILE” screen prompts.
English ………………………………………………………………………………………………………………………………………………………………………………………. ……………………………. ……………………………. ………………………………… Select the session to import If you haven’t loaded the beacon previously, QRacing will ask you to edit beacon. Click “Yes” and will load the beacon from 6000S, or you may click “Cancel” to edit the beacon by you. Note: Once loading beacon from 6000S, QRacing will remember this beacon set and use it for all other sessions with the same track.
GPS Lap Timer English …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… K-3. Analyze Data Once beacon is loaded or edited, you may start to analyze and view your racing data. Switch to Analysis page to view and analyze your lap time and the best result will be highlighted in blue. Sector View Sector = the time from one split point to next split point. ……………………………………………………………………………………………………………………………………………………………………………………….
English ………………………………………………………………………………………………………………………………………………………………………………………. ……………………………. ……………………………. ………………………………… Spilt View (Cumulative) Split = the cumulative time from start point to a split Point Point Current Speed View K-4. Track-Map view In Track page, you can select three laps for showing and compare the data. You can also compare the laps by line graph with Distance-base or Time-base. .......................................................................................................
GPS Lap Timer English …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… QRacing will display the vehicle’s braking zone with a thick line and acceleration zone with a thinner line; which can be beneficial for driver to improve their lap times. Click the play button on the status bar. It can replay the selected 3 laps and display the racing information by time and speed simultaneously. K-5.
English ………………………………………………………………………………………………………………………………………………………………………………………. ……………………………. ……………………………. ………………………………… K-6. Video QRacing can sync the racing video with the track. In Video page; click on the button “Set video for track...” the video setting dialog will pop out. You can add, remove and edit the videos. K-7. Compare with other users Click on “Comparison”, you can choose tracks belong to the same racing type (Circuit, Drag or Rally racing) and compare with other user’s track.
GPS Lap Timer English …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… http://www.qstarz.com/reg.php M. Update the Software: Please always go to Qstarz download page to check if there is any latest software update. http://racing.qstarz.com/ N. Frequently asked Questions 1.
English ………………………………………………………………………………………………………………………………………………………………………………………. …………………………………………………………………………………………………. ......................................................................................................................................................................................................................................................................................... .......... 32 Racing.Qstarz.
