Manual

[phone] www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
346
2. Enable AM function on an interface
Command
Explanation
Port Mode
am port
no am port
Enable/disable AM function on the port. When the
AM function is enabled on the port, no IP or ARP
message will be forwarded by default.
3. Configure the forwarding IP
Command
Explanation
Port Mode
am ip-pool <ip-address> <num>
no am ip-pool <ip-address> <num>
Configure the forwarding IP of the port.
4. Configure the forwarding MAC-IP
Command
Explanation
Port Mode
am mac-ip-pool <mac-address>
<ip-address>
no am mac-ip-pool <mac-address>
<ip-address>
Configure the forwarding MAC-IP of the port.
5. Delete all of the configured IP or MAC-IP or both
Command
Explanation
Global Mode
no am all [ip-pool|mac-ip-pool]
Delete MAC-IP address pool or IP address pool or
both pools configured by all users.
6. Display relative configuration information of AM
Command
Explanation
Global Configuration Mode
show am [interface <interface-name>]
Display the AM configuration information of one
port or all ports.