Manual

[phone] www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
362
2. Configure/delete port number by SSL used
3. Configure/delete secure cipher suite by SSL used
4. Maintenance and diagnose for the SSL function
1. Enable/disable SSL function
Command
Explanation
Global Mode
ip http secure-server
no ip http secure-server
Enable/disable SSL function.
2. Configure/delete port number by SSL used
Command
Explanation
Global Mode
ip http secure-port <port-number>
no ip http secure-port
Configure port number by SSL used, the“no ip
http secure-port” command deletes the port
number.
3. Configure/delete secure cipher suite by SSL used
Command
Explanation
Global Mode
ip http secure-ciphersuite {des-cbc3-
sha|rc4-128-sha| des-cbc-sha}
no ip http secure-ciphersuite
Configure/delete secure cipher suite by SSL
used.
4. Maintenance and diagnose for the SSL function
Command
Explanation
Admin Mode or Configuration Mode
show ip http secure-server status
Show the configured SSL information.
debug ssl
no debug ssl
Open/close the DEBUG for SSL function.
46.3 SSL Typical Example
When the Web function is enabled on the switch, SSL can be configured for users to
access the web interface on the switch. If the SSL has been configured, communication
between the client and the switch will be encrypted through SSL for safety.