Manual

[phone] www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
390
1. Enable or disable SAVI function
Command
Explanation
Global mode
savi enable
no savi enable
Enable the global SAVI function, no command
disables the function.
2. Enable or disable application scene function for SAVI
Command
Explanation
Global mode
savi ipv6 {dhcp-only | slaac-only | dhcp-
slaac} enable
no savi ipv6 {dhcp-only | slaac-only | dhcp-
slaac} enable
Enable the application scene function for
SAVI, no command disables the function.
3. Configure SAVI binding function
Command
Explanation
Global mode
savi ipv6 check source binding ip <ip-
address> mac <mac-address> interface <if-
name> {type [slaac | dhcp] lifetime
<lifetime> | type static}
no savi ipv6 check source binding ip <ip-
address> interface <if-name>
Configure a static or dynamic binding
manually, no command deletes the configured
binding. This command may be configured in
a global function of savi enable, slaac-only
enable, dhcp-only enable or dhcp-slaac
enable.
4. Configure the global max-dad-delay for SAVI
Command
Explanation
Global mode
savi max-dad-delay <max-dad-delay>
no savi max-dad-delay
Configure the max lifetime period of SAVI
binding at DETECTION state, no command
restores the default value.
5. Configure the global max-dad-prepare-delay for SAVI
Command
Explanation
Global mode
savi max-dad-prepare-delay <max-dad-
prepare-delay>
Configure the max redetection lifetime
period for SAVI binding, no command