Manual

[phone] www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
393
binding, but does not limit the static binding
number.
52.3 SAVI Typical Application
In actual application, SAVI function is usually applied in access layer switch to check the
validity of node source address on direct-link. There are four typical application scenes for
SAVI function: DHCP-Only, Slaac-Only, DHCP-Slaac and Static binding. In network
environment, users can select the corresponding scene according to the actual requirement; in
double stacks network, while SAVI function associates with IPv4 DHCP snooping to use, IPv4
and IPv6 source address authentication is implemented.
Typical network topology application for SAVI function:
Client_1
Client_2
Ethernet1/13Ethernet1/12
Switch2 Switch1
Ethernet1/1 Ethernet1/2
Switch3
Client_1 and Client_2 means two different user’s PC installed IPv6 protocol, respectively