Manual

[phone] www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
43
<string> [access {<num-std>|<name>}]
[ipv6-access {<ipv6-num-std>|<ipv6-
name>}] [read <read-view-name>] [write
<write-view-name>]
no snmp-server community <string>
[access {<num-std>|<name>}] [ipv6-access
{<ipv6-num-std>|<ipv6-name>}]
the no command deletes the configured
community string.
3. Configure IP address of SNMP management station
Command
Explanation
Global Mode
snmp-server securityip { <ipv4-address> |
<ipv6-address> }
no snmp-server securityip { <ipv4-
address> | <ipv6-address> }
Configure IPv4/IPv6 security address which is
allowed to access the switch on the NMS; the
no command deletes the configured security
address.
snmp-server securityip enable
snmp-server securityip disable
Enable or disable secure IP address check
function on the NMS.
4. Configure engine ID
Command
Explanation
Global Mode
snmp-server engineid <engine-string>
no snmp-server engineid
Configure the local engine ID on the switch.
This command is used for SNMP v3.
5. Configure user
Command
Explanation
Global Mode
snmp-server user <use-string> <group-
string> [{authPriv | authNoPriv} auth {md5
| sha} <word>] [access {<num-
std>|<name>}] [ipv6-access {<ipv6-num-
std>|<ipv6-name>}]
no snmp-server user <user-string> [access
{<num-std>|<name>}] [ipv6-access {<ipv6-
num-std>|<ipv6-name>}]
Add a user to a SNMP group. This command
is used to configure USM for SNMP v3.