Operation Manual

Pocket PC Phone User Manual102
Getting
Connected
Pocket PC Phone User Manual 103
Getting
Connected
7.5 Wireless Modem
This utility will simulate your device as a wireless modem, and
let your PC/Notebook be connected to a wireless network.
Before creating a new modem via IrDA, you need install the
software "IrCOMM2K" to tranform IrDA port as a COM port
on your PC/Notebook. You can download it from the web site
http://www.ircomm2k.de.
1
Tap → Programs → then tap Wireless
Modem.
2
Select a connection type :
3
Connect your device via
infrared or serial to a
note-book or PC, and then
tap Start.
Before you press the Start button, please make sure your
device is with a GPRS SIM card and you have connected this
device to your PC/Notebook by Serial or IrDA connection and
disabled the Activesync.
7.6 Bluetooth
Bluetooth is a short-range wireless communications tech-
nology. Devices with Bluetooth capabilities can exchange
information over a distance of about 10 meters without
requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. The devices only need to be within
a range of about 10 meters. You can even beam information
to a device in a different room, as long as it's within range.
The software included with your Pocket PC Phone allows you
to use Bluetooth in the following ways :
n Beam information, such as les, appointments, tasks,
and contact cards, between devices that have Bluetooth
capabilities. For example, if you and a co-worker each
have a device with Bluetooth, you can beam items
between your devices, such as les, contact cards, ap-
pointments, tasks, and so forth.
n Create a dial-up modem connection between your
device and a Bluetooth phone. You can then use the
Bluetooth phone as a modem.