Operation Manual
Pocket PC Phone User Manual104
Getting
Connected
Pocket PC Phone User Manual 105
Getting
Connected
1
Tap → Setting → Connections tab
2
Tap Bluetooth.
3
Select Discoverable.
Other Bluetooth devices can now detect your device and
attempt to beam information to it, establish a bond, or use a
Bluetooth service. Note that to receive beamed information,
you must accept it on your device.
Selecting Discoverable also turns on your
Bluetooth radio.
If you no longer want your device to be discoverable, tap Off
to turn off the radio or On to leave the radio on, but not allow
detection by other devices.
Bonds
A bond is a relationship that you create between your Pocket
PC and another Bluetooth device in order to exchange infor-
mation in a secure manner. Creating a bond involves entering
the same personal identication number (PIN) on the two
devices you want to bond. You need only create a bond once
between two devices. Once a bond is created, the devices
recognize the bond and are able to exchange information
without your entering a PIN again.
a. To create a Bond :
You can create a bond between your device and another de-
vice that has Bluetooth. Once you do this, Bluetooth doesn’t
need to be in discoverable mode in order for you to beam
information between the two devices; the Bluetooth radio only
needs to be turned on.
1
Make sure that the two devices are within 10
meters of one another and that Bluetooth is in
discoverable mode on both devices.
2
Tap → Settings → Connections tab.