Operation Manual

Pocket PC Phone User Manual104
Getting
Connected
Pocket PC Phone User Manual 105
Getting
Connected
3
Tap Bluetooth → Bonded Devices tab → New.
Your device searches for other Bluetooth devices
and displays them in the list.
4
Tap the name of the other device in the list, and
then Next.
5
In PIN, enter a PIN of between 1 and 16
characters and tap Next.
6
Enter the same PIN on the other device.
7
If you want, in Name, edit the name of the other
device.
8
Tap Finish.
b. To accept a Bond :
1
Make sure that Bluetooth is turned on and in
discoverable mode.
2
When prompted to bond with the other device,
tap OK.
3
In PIN, enter a PIN of between 1 and 16
characters, and tap Next. You must enter
the same PIN that was entered on the device
requesting the bond.
4
If you want, in Name, edit the name of the device
requesting the bond.
5
Tap Finish.
The bond is created. You can now exchange information with
the other device.