Operation Manual

Pocket PC Phone User Manual106
Getting
Connected
Pocket PC Phone User Manual 107
Getting
Connected
Receiving a Bluetooth Beam
1
Make sure that your device is congured to
receive incoming beams and that
Bluetooth is
in discoverable mode.
2
Make sure that your device is within 10 meters
of the device beaming the information.
3
When prompted to receive an incoming beam,
tap Yes.
The information is now stored on your device.
Using a Bluetooth Phone as a
Modem
You can use a phone that has Bluetooth capabilities as a mo-
dem for your device. To do this, you create a Bluetooth modem
connection on your device and then send information to the
phone by using Bluetooth. The phone relays the information
over the phone line and then sends back to your device any
information that you had requested over the connection.
Once you create a modem connection to the Bluetooth phone,
you can reuse it whenever you want to use the phone as a
modem.
1
Make sure that the Bluetooth phone is turned
on, that your device’s and the phone’s Bluetooth
radios are turned on, and that your device and
the phone are within 10 meters (10 meters) of
one another.
2
If you have not already done so, create a
Bluetooth phone connection by following steps
3 through 16. Otherwise, skip to step 17.
3
Tap → Settings → Connections tab.
4
Tap Connections → Add a new modem
connection.
5
Enter a name for the connection.
6
In the Select a modem list, tap Bluetooth →
Next.