Operation Manual

Appendix A
Maintaining
Pocket PC Phone User Manual164
Appendix A
Maintaining
Pocket PC Phone User Manual
165
Adding or Removing Programs
Programs added to your device at the factory by default are
stored in ROM (read only memory). You cannot remove them,
and you will never accidentally lose them. You can install
any other programs created for your device, as long as your
device has enough memory. The most popular place to nd
software for your device is on the Pocket PC Web site http:
//www.microsoft.com/mobile/pocketpc.
To add programs using ActiveSync :
You will need to install the appropriate software for your device
on your PC before installing it on your device.
1
Download the program to your PC (or insert the
CD or disk that contains the program into your
PC). Be sure to select the program designed
for the Pocket PC and your device process or
type.
2
Read any installation instructions, or
documentation that comes with the program.
Many programs provide special installation
instructions.
3
Connect your device and PC.
4
Double click the .exe le.
n If the le is an installer, the installation wizard
will begin. Follow the directions on the screen.
Once the software has been installed on your
PC, the installer will automatically transfer the
software to your device.
n If the le is not an installer, you will see an
error message stating that the program is
valid but it is designed for a different type of
PC. You will need to move this le to your
device. If you cannot nd any installation
instructions for the program in the Read Me le
or documentation, use ActiveSync Explore
to copy the program le to the Program Files
folder on your device.
Once installation is complete, tap
→ Programs →
and then its program icon.