MITO Mito RGB 1420mW RGB Effects Laser Item ref: 152.
Thank you for choosing this QTX MITO high power laser. This high power effects laser offers a vast selection of patterns and grating effects including the popular "3D", "3D thread" and "galaxy" displays. The high precision pattern themes can be controlled via the 23 channel DMX-512 control. Intelligent time modulation mimics a two head laser system allowing two different patterns to be displayed simultaneously. The laser is best projected on to a flat surface, such as a wall or ceiling, or through smoke.
In the box: The MITO laser should arrive to you in a single carton. Please ensure the box is in perfect undamaged condition before accepting goods. You carton should contain the following: MITO laser unit 2 x IEC power leads (EU and UK) 2 x safety keys User manual Installation: This product must be securely mounted with adequate fixings to hold the weight. If mounted at a height use a safety wire attached to the eyebolt and a secondary fixing point.
Aerial view: Connecting: Use the included UK or EU mains lead to connect to the mains power supply. To wire directly to the mains, earth wiring must be connected for safety. Please refer to below colour coding for the correct wiring. Wire colour Brown Blue Yellow/Green Connection Live Neutral Earth International Symbol L N 152.
Fuse replacement: In the event of fuse failure always ensure the mains is switched off and the IEC connection is removed before opening the fuse cover. Remove the fuse from the fuse holder and replace with a new one. Always used the correct fuse rating stated on the unit. Place the fuse cover back in the keyed slot, ensuring you are placing it back the correct way. Do not force the cover in the wrong way. Maintenance: There are no end-user serviceable parts within the unit.
1. Mic sensitivity, adjust level appropriately to ambient sound level for ideal sound-to-light trace. 2. Safety key switch. 3. DMX signal indicator, flashes when DMX signal present. 4. XLR socket for DMX signal in. 5. XLR plug for DMX signal loop out. 6. Dip switch to switch between auto, sound to light and DMX mode, also serves as DMX initial address setting. 7. Built in microphone. 8. D connector for interlock control. 9. Ventilation fan, do not block. 10. Earth connection screw, DO NOT remove. 11.
DIP Switch Control: The MITO laser has 3 pre-programmed auto modes and 3 pre-programmed sound-to-light modes, to choose auto mode switches 9 and 10 must be switched off. Auto 1 Auto 2 Auto 3 To choose sound-to-light mode, switch 9 must be switch on and switch 10 must be switch off Sound-to-light 1 Sound-to-light 2 Sound-to-light 3 To switch to DMX mode, switch 10 must be switched on and switches 1-9 can be used to set the initial DMX address, below is the indication of DMX address for switches 1-9.
The MITO can be controlled by DMX over 23 channels, below is the function indication for various DMX values in individual channels: *S2L – sound-to-light Channel DMX Function value CH1/CH12 (identical, ch1 controls pattern1, ch12 controls pattern 2) CH2/CH13 (identical, ch2 controls pattern1, ch13 controls pattern 2) CH3/CH14 (identical, ch3 controls pattern1, ch14 controls pattern 2) 0 Black out 1-6 Auto slide mode reduce pattern size to 50%@1 and 4, 25%@2 and 5, 12.
CH4/CH15 (identical, ch4 controls pattern1, ch15 controls pattern 2) 0-63 Manual rotation 64-191 Auto/S2L (control by ch1) 2 ways rotations 192-223 Auto/S2L (control by ch1) rotation clockwise 224-255 Auto/S2L (control by ch1) rotation anti-clockwise 0-63 CH5/CH16 (identical, ch5 controls pattern1, ch16 controls pattern 2) 64-127 128-255 0-63 CH6/CH17 (identical, ch6 controls pattern1, ch17 controls pattern 2) 64-127 128-255 0-63 CH7/CH18 (identical, ch7 controls pattern1, ch18 controls pattern
ch22 controls pattern 2) CH23 32-47 Laser colour to green 48-63 Laser colour to yellow 64-79 Laser colour to blue 80-95 Laser colour to purple 96-111 Laser colour to cyan 112-127 Laser colour to white (full power) 128-191 Uniform colour change 192-255 Graduate colour change by parts 0-31 Grating effect 1 32-47 Grating effect 2 48-63 Grating effect 3 64-79 Grating effect 4 80-95 Grating effect 5 96-111 Grating effect 6 112-127 Grating effect 7 128-143 Grating effect 8 144-15
Trouble shooting: No power output Power on but no output DMX mode no output Check mains power is connected correctly and mains cable is in good condition. Check fuse is in working condition, if fuse continually blows stop use immediately and refer unit to qualified personnel. Check dip switch 10 is not switched on. Check key switch is switched on. Check interlock switch if there is one connected. If ambient temperature is low, laser head may take up to 30 min to warm up for max output.
