Specifications

PN 060558-001

Revision B, January 2002

Page 3-31

DLP-510

Page 1 of 1

CONNECT RECEIVER TO 120/240 VAC POWER SOURCE

Summary: The receiver can be configured at the factory for operation from a 120 VAC or 240

VAC power source. A matching 120 VAC or 240 VAC power cord is supplied with the receiver

when so configured.

1. Ensure the power source has been turned off.

2. Connect the receiver end of the power cord to the power connector at the back of the

receiver as shown in Figure 510-1.

3. Route the power cord to the AC receptacle and firmly insert the plug.

4. Dress the power cord and secure it as required.

5. Do not apply power at this time.

6. Update office records as required.

Stop! You have completed this procedure.

ALARM

MAJOR MINOR

FUSE

120/240 VAC

RECEIVER REAR PANEL

AC POWER CORD

CONNECTOR

5132-A

Figure 510-1 AC Power Connections