Product data

TDA8007BHL All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 9.1 — 18 June 2012 38 of 51
NXP Semiconductors
TDA8007BHL
Multiprotocol IC card interface
Configured as output
V
OL
low-level output voltage I
OL
=1mA 0 - 0.3 V
V
OH
high-level output voltage I
OH
< 20 µA 0.8V
CC
-V
CC
+0.25 V
I
OH
< 40 µA for 5 V and 3 V
cards
0.75V
CC
-V
CC
+0.25 V
t
o(r)
, t
o(f)
output transition time (rise and fall
time)
C
L
< 30 pF - - 0.1 µs
Configured as input
V
IL
low-level input voltage 0.3 - +0.8 V
V
IH
high-level input voltage 1.5 - V
CC
V
I
IL
low-level input current V
IL
= 0 V - - 600 µA
I
LIH
high-level input leakage current V
IH
=V
CC
--20µA
t
i(r)
, t
i(f)
input transition time (rise and fall time) C
L
<30pF - - 1.2 µs
Auxiliary cards contacts: pins C41, C81, C42 and C82
[3]
V
o(inactive)
output voltage in inactive mode no load 0 - 0.1 V
I
o(inactive)
=1mA - - 0.3 V
I
o(inactive)
output current in inactive mode V
o
=0V - - -1 mA
t
W(pu)
active pull-up pulse width - 200 - ns
R
int(pu)
internal pull-up resistance between pins C4x or C8x and
V
CC
81012k
f
max
maximum frequency on card contact pins - - 1 MHz
Configured as output
V
OL
low-level output voltage I
OL
=1mA 0 - 0.3 V
V
OH
high-level output voltage I
OH
< -20µA 0.8V
CC
-V
CC
+0.25 V
I
OH
< -40µA for 5 and 3 V
cards
0.75V
CC
-V
CC
+0.25 V
t
o(r)
, t
o(f)
output transition time (rise and fall
time)
C
L
=30pF - - 0.1 µs
Configured as input
V
IL
low-level input voltage - - +0.8 V
V
IH
high-level input voltage 1.5 - V
CC
V
I
IL
low-level input current V
IL
= 0 V - - 600 µA
I
LIH
high-level input leakage current V
IH
=V
CC
--20µA
t
i(r)
, t
i(f)
input transition time (rise and fall time) C
L
=30pF - - 1.2 µs
Timing
t
act
activation sequence duration see Figure 18 --130µs
t
de
deactivation sequence duration see Figure 19 --150µs
Protection and limitation
I
CC(sd)
shutdown and limitation current at
pin V
CC
- 100 - mA
I
I/O(lim)
limitation current on pin I/O 15 - +15 mA
I
CLK(lim)
limitation current on pin CLK 70 - +70 mA
Table 35. Characteristics
…continued
V
DD
=3.3V; V
DDA
=3.3V; T
amb
= 25 °C; unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit