Specifications

Dakota Micro, Inc.
Page 3 of 20 Author: CMZ
 Built-in, high quality CCD camera with high performance infrared (IR) illuminator modules.
 IR has effective range of 45’+ in complete darkness.
 In-line conditioner and surge suppressor prevents over/under powering of unit, preventing
damage.
 Built-in CDS light-source sensor can automatically turn on/off the IR’s by detecting the light
intensity of the environment.
 Our exclusive Photogray camera body lens darkens in bright conditions and becomes completely
transparent under low light conditions. This lens is also transparent of infrared light, allowing the
LED’s to penetrate even when its darkened.
 Standard lens features 92° field of view (3.6mm).
 Optional lenses available include: 6mm, 12mm & 16mm.
 Removable/Replaceable camera tail.
b. Quad Monitors
 Features the latest in LCD technology.
 Adjust brightness, contrast, saturation, hue and sharpness for each camera, adjustable for both
the monitor and quad settings.
 Credit card style remote control included
 Full quad display at real time refresh rate (60fps).
 Supports both NTSC and PAL video formats.
 Camera title settings allow you to uniquely name each camera.
 Individually mirror each camera.
 On screen display includes date & time.
 View 1, 2 or 4 cameras at the same time.
c. Cables
 Silicone jacket enables high flexibility in all temperatures.
 AGCO combine camera kits include durable extension cables in 20’ and 40’ standard lengths and
feature sturdy, watertight connectors.
 Custom video cables lengths available: 10’, 20’, 30’, 40’, 50’, 60’and 80'.
3. CAMERA INSTALLATION & MOUNTING
Temporary Mounting
For temporary mounting, it is recommended that you use the supplied 65# pull magnet. If using
magnetic mount, fasten camera cable with a zip tie or other style fastener. This will act as a “safety
wire” in the event your camera is knocked loose for some reason. When selecting a location, make
sure that the equipment surface is clean of all foreign material and as flat as possible to ensure that the
magnetic camera base will have good contact and not vibrate off.
Permanent Mounting:
For permanent mounting, it is recommended that you remove the magnet and attach to any solid
surface with two (2) screws.
After camera is securely mounted, attach the camera pigtail (AGCO PN: AC-CT) into the back of the camera.
You can now plug your camera tail into the power/video input into AgCam® extension power/video cable.
Make sure they are securely attached and locked (¼ turn will lock the cables together).