Specifications

Dakota Micro, Inc.
Page 9 of 20 Author: CMZ
7. Monitor & Remote Operation
Turn the monitor on only after it has been securely mounted, supplied with power, and
the cameras are connected.
Front of 9” Quad Monitor:
1
Output Jack
Headphone Jack
2-4 FOR USE ONLY WITH Quad Processor
2
Full Screen
When connected to DM Quad, will show cameras 1/2/3/4 each time pressed.
3
Duplex Screen
When connected to DM Quad will show cameras 1 /4 and cameras 2 /3 each time
pressed.
4
Quad Screen
When connected to DM Quad will display all four (4) cameras connected.
5
- Key
To decrease parameter.
6
+ Key
To increase parameter.
7
MENU
To switch menu selection, press multiple times. To go to next icon, use +.
8
AV Key
Switches between AV1, AV2, AV3, & AV4.
9
POWER
Turns monitor ON/OFF .
11-12 ports located on sides and bottom of monitor
10
USB Port
Input for optional cable when using a computer connected to the VGA port.
(duplicates image from input device)
11
Quad Plug
USB female connector for Quad processor.
12
VGA Input
Input for VGA from computer or other console .(duplicates image from input device)