II Classic Monobloc Valve Power Amplifier Owner's Manual

ManualsBrandsQUAD ManualsAmplifierMonobloc Valve Power Amplifier II Classic

Owner’s Manual

Quad Electroacoustics Ltd, IAG House,

Sovereign Court, Ermine Business Park,

Huntingdon PE29 6XU

England

www.quad-hifi.co.uk

Tel: 01480 447700 Fax: 01480 431767

Quad II Classic

Monobloc Valve Power Amplifier

KT6 6 KT6 6

Classic

Summary of content (4 pages)

PAGE 1
Quad II Classic Monobloc Valve Power Amplifier KT66 KT66 Classic Quad Electroacoustics Ltd, IAG House, Sovereign Court, Ermine Business Park, Huntingdon PE29 6XU England www.quad-hifi.co.
PAGE 2
Important Safety Precautions - Please Read Carefully! CAUTION! Example of Antenna Grounding as per National Electrical Code RISK OF ELECTRIC SHOCK DO NOT OPEN Ground clamps TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-REMOVEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED PERSONNEL Antenna discharge unit (NEC Section 810-20) Electric service equipment ADVERTISSEMENT: RISQUE DE CHOC ELECTRIQUENE PAS OUVRIR The lightning flash with arrowhead symbol, within an equilateral t
PAGE 3
As the valves start to wear out the sound will become less well defined and a lack of dynamics and power will become evident. When replacing valves it is essential to use the highest quality available. Poor quality valves will adversely affect the sound quality and may in extreme cases damage the amplifier. When replacing the valves do so as pairs, and for best results use matched pairs.
PAGE 4
If this is your first valve amplifier please familiarise yourself with some important issues surrounding the safe use of the QUAD II Classic. Valves Get Hot Loudspeaker Connections Strip any outer sleeve from the cable to a depth of around 40 mm (1.5”). Strip the top 7mm of sleeving to expose the bare wire. If you are using stranded cable, lightly twist the strands to gather any loose ends.