User`s manual

ManualsBrandsQuadra-Fire ManualsHome building and DecorMTVERNINSAE-PM

www.quadrare.com

7014-101F

April 1, 2009

User’s Manual

DO NOT DISCARD THIS MANUAL

NOTICE

• Importantoperatingand

maintenance instruc-

tionsincluded.

• Leavethismanualwith

partyresponsibleforuse

andoperation.

• Read,understandand

follow these instruc-

tionsforsafeinstalla-

tionandoperation.

DO NOT

DISCARD

O-T L

Tested and

Listed by

Portland

Oregon USA

OMNI-Test Laboratories, Inc.

WALL CONTROL

Part SRV7000-451

A. Introduction ...................................................2

B. Main Screen

1,. SystemStatusCodes .........................2

 2. CurrentTime .......................................2

3. SetTemperature .................................2

 4. NoticationIcons .................................2

5. FunctionButtons .................................3

 6. CurrentTemperature ..........................3

C. General Information about using the

Wall Control .....................................................3

TABLE OF CONTENTS

Checkbuildingcodespriortoinstallation.

• Installation MUST comply with local, regional, state and

nationalcodesandregulations.

• Consult local building, re ofcials or authorities having

jurisdiction about restrictions, installation inspection, and

permits.

CAUTION

Hearth & Home Technologies

1445 North Highway, Colville, WA 99114

Division of HNI INDUSTRIES

CONTACT INFORMATION:

Please contact your Quadra-Fire dealer with any questions or

concerns. For the number of your nearest Quadra-Fire dealer log

on to www.quadrare.com

D. Main Menu

 1. SetComfortLevel(Temperature) .......3

2. Auto/Manual/Off ..................................4

 3. FuelType ............................................4

 4. Programming ......................................5

 5. SetDay/Time ......................................4

 6. UserSettings ......................................6-7

E. Quick Start Guide ............................................8-9

F. Service Information .........................................10

G. Error Codes .....................................................10

H. Battery Back-up (Optional) ............................10

I. Troubleshooting Guide ....................................11

Mt. Vernon Pellet Appliances (AE)

EDGE™ 60 Pellet Fireplace

Summary of content (12 pages)

PAGE 1
R User’s Manual WALL CONTROL Tested and Listed by Portland Oregon USA O-T L C US OMNI-Test Laboratories, Inc. Part SRV7000-451 Mt. Vernon Pellet Appliances (AE) EDGE™ 60 Pellet Fireplace NOTICE DO NOT DISCARD THIS MANUAL • Read, understand and • Leave this manual with follow these instructions for safe installation and operation. party responsible for use and operation. T O N RD O A D SC I D • Important operating and maintenance instructions included.
PAGE 2
R A. Introduction c. AUTO: (x) or MAN: (x) (x) = heat output level Welcome to the Quadra-Fire family. This manual will help you understand and operate the wall control attached to your new pellet Advanced Energy appliance. Indicates both the operating cycle (automatic or manual) and the current heat output level. The heat output level will be “H” high, “MH” medium high, “M” medium, “ML” medium low and “L” low.
PAGE 3
R 5. Function Buttons 1. Set Comfort Level (Temperature) The function buttons have two labels above them in the display area. Their labels can change depending on the menu screen. On the main screen the left button will bring up the system menu and the right button has functionality only in MANUAL cycle. Figure 3.2. The most basic operation of the wall control is to turn the appliance on or off depending on the requirement for heat.
PAGE 4
R 3. Fuel Type 2. Auto / Manual / Off Selection a. Automatic In the AUTOMATIC cycle the wall control will turn the appliance on and off automatically and also turns the heat output level up or down depending on the temperature setting. The further away the room temperature is from the set temperature, the higher the heat output. AUTO/MANUAL SETTINGS Automatic Manual Off The FUEL TYPE screen is used to select the fuel that will be used with the pellet system.
PAGE 5
R a. Full Week 5. Set Day/time NOTE: It is important to note that the most recent programming entry will override all previous programming for an individual day or range of days. The small triangle on the left side indicates the current active programming line. Figure 4.6 on page 4. For each of the four intervals available to program there are three adjustable values: set hour, set minutes and set temperature. You will need to increase or decrease the hour to change from AM to PM.
PAGE 6
R b. Set Date When the SET DATE screen is entered the month name is highlighted. Use the UP/DOWN buttons to select the proper month then press the button under “Set/Next.” 6. User Settings Items that are rarely changed are stored under the USER SETTINGS. The highlight will move to the day of the month display. Using the UP/DOWN buttons, select the current date then press “Set/Next.” The highlight will move to the year display.
PAGE 7
R c. Temp Differential f. Elevation The TEMPERATURE DIFFERENTIAL screen is used to change the set default temperature differential. This sets how far below the set point the wall control allows the room temperature to fall before the appliance turns back on. It is usually set at time of installation. The ELEVATION screen allows you to adjust the appliance to your specific elevation. Press the UP/DOWN buttons to select your elevation. The message in the center will change between NORMAL and HIGH.
PAGE 8
R E. Quick Start Guide NOTICE: Any button pressed will turn on the backlight. The wall control will auto- matically revert back to the starting screen if there is no activity for 15 seconds; except for the “CONFIRM FUEL CHANGE” screen. . Choosing Fuel Type Buttons Room Temp READY 12:30 PM 73 Set at: 73 MENU Up Down HEAT OUTPUT READY 12:30 PM 71 Set at: 68 Choosing TEMP UNIT: °f or °c MENU Function Buttons 1.
PAGE 9
R E. Quick Start Guide (Cont’d) Setting Comfort Level READY 12:30 PM READY 12:30 PM 71 Set at: 68 71 Set at: 74 Hold MENU 1. NOTE: 1. Set temperature must be 3 degrees higher than room temperature for appliance to start. 74 ºF 2. MENU HEAT OUTPUT Press and hold “UP” or “DOWN” button to set desired temperature. Press “HOLD TEMP”. HOPPER OUT OF FUEL Setting Heat Output ERROR LIST Min Firepot Temp HEAT OUTPUT At the starting screen, press “HEAT OUTPUT”. RETRY 1.
PAGE 10
R F. Service Information The SERVICE INFORMATION screen displays contact information for Hearth & Home Technologies Customer Service Line. The local dealer may have changed this upon or before the installation to indicate a dealer hot line. www.quadrafire.com to locate your nearest dealer DONE Operating on Battery Back-Up • A battery icon appears on your wall control to let you know you are now operating on battery power. Figure 10.3.
PAGE 11
R I. TROUBLESHOOTING With proper installation, operation, and maintenance your appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a qualified service person in the diagnosis of a problem and the corrective action to be taken. NOTE: This troubleshooting guide should only be used by a qualified service technician.
PAGE 12
R CONTACT INFORMATION: Hearth & Home Technologies 1445 North Highway Colville, WA 99114 Division of HNI INDUSTRIES Please contact your Quadra-Fire dealer with any questions or concerns. For the number of your nearest Quadra-Fire dealer visit our web site at www.quadrafire.com NOTICE • Leave this manual with party responsible for use and operation.