Owner`s manual

May 23, 2013

7063-173E

Page 25

VOYAGEUR Wood Insert

G. Tube Channel Assembly Replacement

Figure 25.3

Removing Tube Channel Assembly

1. Remove the andirons and the right front brick cover.

2. Remove the 3 right side bricks.

3. Remove the bafe protection channel by bending back the tabs

using needle nose pliers located at the right and left side of the

protection cover. Lift the cover up slightly and pull toward the

front and out of the rebox. Figure 25.1.

4. Locate the 2 channel nuts inside of chamber and remove using a

7/16 socket wrench. Figure 25.2.

NOTE: Soak the bolts with penetrating oil for at least 15 minutes

before trying to remove them.

5. Slide the tube channel assembly all the way to left until it is off the

threads. Drop the right side down, then slide the assembly back

to right. Figure 25.3.

6. The ceramic blanket and both bafe boards can be removed at

the same time you remove the tube channel assembly.

7. When the tube channel assembly is free of the left side sup-

port, rotate clockwise and pull assembly, blanket and bafes out

through the front opening.

8. Re-install in reverse order.

Baffle Protection

Channel

Bend Back Tabs

Use 7/16 Socket Wrench

and Remove Channel Nuts

Figure 25.1

Figure 25.2

Tube

Channel

Assembly

2 Tube Channel Nuts

Ceramic Blanket

Right Front

Brick Cover

Andirons

Baffle

Protection Channel

2 Baffle Boards