Data Sheet

EN 61340-5-1
Special Note:
Heel Grounder Straps should not be used in areas where
the individual may come in contact with electrical circuitry
exceeding 250 volts.
ESD Character of the Product may vary depending upon
Humidity Factor
How heel Grounder Works
Heel grounders eliminate a charge on a person by electrically connecting the person to a grounded surface. A conductive rib-
bon placed inside the wearer’s shoe or sock makes electrical contact with the skin through perspiration. The assembly
contains a current limiting resistor which protects the operator from accidental exposure to electricity. Heel grounders must be
worn on both feet to maintain ground contact while walking.
Specications:
1MΩ Overall Safety Resistor
Unisex Style
Non Marking Sole Interior
Hard Wearing Heel Grounders Designed for Long Term Use
Reusable and can be Washed by Hand in Mild Detergent
Recommended to Worn on both Feet
Components
Outer Conductive surface (Black)
Inner Anti-Static Surface (Grey)
Conductive Ribbon (Blue)
Adjustable Strap with Clip Fasteners
Resistivity
10 -10 Ω
10 -10 Ω
10 Ω
NA
6
3
5
5
7
Dimensions
Length-200mm, width 35mm, Thickness 0.5mm
Length 200mm, width 35mm, Thickness 1.5mm
Length 600mm, Width 10mm
Length 300mm, Width 20mm
Features:
Two Layer Rubber Sole, Black Elastic Strap, Adjustable Strap with Clip Fasteners, Conductive Ribbon
Conducve Ribbon
Rubber Sole
Adjustable Strap with
Clip Fasteners
Installaon Method
ESD Conductive Heel Grounder
Item No 1903EC040