Data Sheet

EN 61340-5-1
Caution:
The Heel Grounder is for ESD control. It will not reduce or
increase your risk of receiving electric shock when using
or working on electrical equipment
How to Attach Disposable Heel Grounder:
Strip release paper from pressure sensitive adhesive.
Insert the non-adhesive end of the disposable heel grounder
inside the shoe under the foot so that the black dot is in the
center of the heel area, facing upwards.
Wrap the tape snugly around the outside of the shoe so that the Wrap the tape snugly around the outside of the shoe so that the
adhesive area adheres to the underside of the heel of the shoe.
Step firmly onto pressure-sensitive adhesive and tear off excess
material at serration.
1.
2.
3.
4.
It is important that the conductive ribbon has good
electrical contact with the person's body through direct contact
with the person's skin or by connection through the
person's socks
*Recommended to use Heel Grounders on both Feet
Material:
Conductor:
Length:
Width:
Electrical Resistance (end-to-end):
Yellow non-woven fibrous material
Carbon black
310mm
14mm
10
4
- 10
5
Ω
Description:
This Disposable Heel Grounder is Ideal for flooring/footwear personnel grounding of Visitors in ESD protected
areas. The Black Conductive strip is bordered by Bright Yellow color material providing excellent visibility, assist-
ing in enforcing an ESD control program. The conductive non-woven fibrous strip is held to the heel of the shoe
by pressure sensitive adhesive.
Black Conductive Strip
Yellow Fibrous Material
10 Strips per One sheet
Installation Method
Item No 1903EC041
ESD Disposable Conductive Heel Grounder