Datasheet

Carbon-film resistor-set 1/4 W (THT) 400pcs
Item No.: 201711P001
Whether in the laboratory, in workshops, development
offices or for hobby, leisure and education: with this high
quality range of resistors you are always well equipped.
Wired carbon film resistors (through-hole-mounting) are
standard components in electronics and engineering and
are indispensable in the practical handling of this matter.
Included are 20 different default values. By series or
parallel connection or combinations, any intermediate
values can be formed. That is why this set is also ideally
suited for educational purposes and is often used in
educational institutions.
Technical data: Rated power: 0.25 W (Derating from Ta=70°C) • Tolerance: 5% • Temp.-range: -50 ... 150 °C • Working
voltage: 300 V • Dielectric withstanding/overload voltage: max. 600 V • Temp. coefficient max ±350 ppm/°C (<100kΩ) / 0…
-700 ppm/°C (100kΩ…1MΩ) • Solder ability: Dip the lead in to a solder bath having a temperature of 260℃±5℃ up to
4±0.8mm from the body of the resistor and hold it for 5± 0.5 seconds then inspect.
Refill packs available, content 100 pcs. per value: