Instructions / Assembly

www.hettich.com
9
ø6
11
Cabinet front edge
Min. setback for inset or roll out tray:
Decorative drawer front thickness + 2.5 mm (3/32“).
Trial recommended! See details for adjustment possibilities.
Blocking behind frame
Minimum/maximum cabinet depth
Face frame application with
overlay decorative front
Face frame application with
inset decorative front
Front gap 1.5 mm (1/16“)
Setback 1 mm (1/32“)
10 mm (3/8“)
37 mm (1 7/16“)
Inset application increases minimum cabinet depth!
10
Cabinet front edge
Minimum/maximum cabinet depth
Front gap 1.5 mm (1/16“)
Setback 1 mm (1/32“) *
10 mm (3/8“)
37 mm (1 7/16“)
Inset application increases minimum cabinet depth!
b1
* Min. setback for inset or roll out tray:
Decorative drawer front thickness + 2.5 mm (3/32“).
Trial recommended! See details for adjustment possibilities.
Full Access Quadro (FAQ)
Mounting specications
Mounting specications - framless application
Dimensions in millimeters (inch approximations as noted).
Mounting specications – face frame application
)hcni( mm 1bmetI
Full Access Quadro 15“ 320 mm (12 19/32“)
Full Access Quadro 18“ 416 mm (16 3/8“)
Full Access Quadro 21“ 480 mm (18 1/8“)
Minimum two # 6 - # 8 at head or
ø 6.3 x 14 mm Euro screws per side