Serial Port POS User & Installation Manual 1 User & Installation Manual Serial Port POS Version 4.
Serial Port POS User & Installation Manual 2 Contents CONTENTS ..................................................................................................................................................................................................... 2 PREFACE ........................................................................................................................................................................................................ 3 1 INTRODUCTION.....................
Serial Port POS User & Installation Manual 3 Preface This document This manual is intended for administrators and operators of a WebCCTV Video Recorder who want to use the POS (Point Of Sale) component and is applicable for WebCCTV software version 4.4.0.0 or higher. This manual is applicable for both WebCCTV, GuardNVR and IQR Video Servers. Therefore WebCCTV can be replaced at all times by GuardNVR and IQR.
Serial Port POS User & Installation Manual License Agreement Copyright (C) 1997-2010 by Quadrox tsov. All rights reserved. PLEASE, READ THIS DOCUMENT CAREFULLY BEFORE INSTALLING THE SOFTWARE. BY INSTALLING AND USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS OF THE AGREEMENT, DO NOT INSTALL OR USE THE SOFTWARE.
Serial Port POS User & Installation Manual Customer represents that it has complied with any regulations or registration procedures required by applicable law to make this license enforceable. This SLA does not grant you any rights in connection with any trademarks or service marks of Quadrox. The license granted herein is conditional on timely payment in full of all applicable invoices and charges.
Serial Port POS User & Installation Manual written consent and without paying any applicable additional fees. You further agree to comply fully with all laws and regulations to assure that, should such consent be granted, neither the Software, nor any direct product thereof, is exported, directly or indirectly, in violation of law.
Serial Port POS User & Installation Manual 7 (iii) operation of the Software will be uninterrupted or error-free, or (iv) all Software errors will be corrected. THESE WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ANY AND ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Serial Port POS User & Installation Manual executed (and Quadrox has accepted) a Quadrox Order Form, or if Quadrox has previously accepted your purchase order, or if there was previously a Quadrox license agreement in effect regarding the Software (each, a "Prior Agreement"), this SLA shall be deemed to modify and amend the Prior Agreement with regard to the subject matter covered by this SLA (and your acceptance of the terms of this SLA shall serve as an expression of your agreement to such modification),
Serial Port POS User & Installation Manual advertising, with respect to the Software. If any provision of this Agreement is deemed invalid or unenforceable by any country or government agency having jurisdiction, that particular provision will be deemed modified to the extent necessary to make the provision valid and enforceable and the remaining provisions will remain in full force and effect.
Serial Port POS User & Installation Manual 10 1 Introduction WebCCTV is a unique digital video surveillance solution, which combines three major functions in one Network Video Recorder (NVR) or Digital Video Recorder (DVR): local digital recording, multiplexing and simultaneous transmission of the video via existing networks (TCP/IP). To a standard WebCCTV, up to 20 cameras can be permanently recorded while multiple operators at different locations on the network are accessing the WebCCTV device.
Serial Port POS User & Installation Manual 11 2 Remote POS Monitor 2.1 Installation Remote POS Monitor has to be installed on the computer to which the POS printer is connected. If you are going to instal Remote POS Monitor on a different unit then the WebCCTV server, please open port 135 on the WebCCTV server in the firewall exception list first before proceeding! To install follow the steps below: 1. Run the Remote POS Monitor Installation setup. This setup can be found in the support section on www.
Serial Port POS User & Installation Manual Setup Type Selection Screen 3. Select Typical and click Next button. 4. Select Yes, I want to restart my computer and click Finish. Remote POS Monitor Finish Screen Version 4.
Serial Port POS User & Installation Manual 13 2.2 Configuration We will configure the POS printer(s) (sources) to be monitored in this tool. Open the Remote POS Monitor Configuration application. You can find it at: Start All Programs Remote POS Monitor Configuration Application. Application Path Screen POS Monitor Configuration Screen Please execute the steps below for the different sections: General Settings Name – By default this hasn’t to be changed.
Serial Port POS User & Installation Manual 14 the name to the log file you specified in the Log File field. o Port – Select the COM port to which the printer is connected. o Incoming direction mode & Open serial port after monitoring started – This only has to be configured when you got a Hardware POS that is directly connected with a cable to the Video Server. o Start Mask – The Start Mask is the expression or the number of symbols from which the POS printer ticket is started.
Serial Port POS User & Installation Manual 15 the pair of symbols { }. For example: Hello{168}World means Hello¿ World If you want to specify a single symbol { or }, specify these symbols two times. For example: {{Hello World}} means {Hello World} Save & Apply Changes Apply – When a new POS printer (source) is added, restart the POS Monitor service by clicking Apply. This makes it possible for Remote POS Monitor to monitor the newly added POS Printer.
Serial Port POS User & Installation Manual 16 3 Alarm Component 3.1 Installation To install the Alarm Component please follow the steps described in the Alarm Component Installation Manual. This chapter retakes the default installation procedure. Before you can install the Alarm Component, the following components have to be installed: WebCCTV Server 4.4.0.0 (or higher) Microsoft Framework .NET 2.1 (or higher) Microsoft SQL Server 2005 Express Edition (or better) The Microsoft Framework .NET 2.
Serial Port POS User & Installation Manual 17 Please read the License Agreement carefully. If you don’t agree with the terms, you can’t install the Alarm Component. Select Typical and click Next. Typical is the default setup type. This is advised for normal installations. Setup Type Screen The Alarm Component installation will start automatically. Select “Yes, I want to restart my computer now” and click Finish.
Serial Port POS User & Installation Manual 18 3.2 Configuration When Alarm Component Installation is completed, open the Video Manager Application on your desktop and go to POS section of the Settings menu. You can Add POS Devices, Configure POS Devices and configure Saved Searches. POS Configuration Screen 3.2.1 Add POS Device In order to add and configure your POS device, click the Edit device or Add POS Device link/button in the POS screen.
Serial Port POS User & Installation Manual 19 3.2.1.2 Protocol In this tab, the protocol has to be selected. It’s a part of the POS Device Configuration Wizard. Select Serial Port POS in the drop-down list. Protocol (Serial Port POS) Screen Click Finish. Depending on the drivers you installed together with the Alarm Component, it’s possible some values are not present in the drop-down list.
Serial Port POS User & Installation Manual Name – specify the name of the POS source. Port – select the COM port to which the POS source is connected. IP address – specify the IP address of the computer on which the POS source is connected. 20 If the WebCCTV server is installed on the same machine the POS printer is connected to, do not use the 127.0.0.1 IP address, but fill in the real IP-address. You can check the real IP address in the TCP/IP properties of your machine.
Serial Port POS User & Installation Manual 3. Click the Add camera button. 4. Decide which camera will be the primary camera which will be shown when selecting a ticket. Recordings (Serial Port POS) Screen To delete a camera, click Delete. Click Finish button. Version 4.
Serial Port POS User & Installation Manual 22 4 POS Transactions 4.1 Search POS Transactions The Recordings menu of the Video Browser application allows you to search and view recorded footage and export clips of this video footage. Recordings Screen Please execute following steps: Selecting the time period is needed for all possible recording requests as you need to search amongst all footage which has been recorded. To select a time period, you have to specify time and date.
Serial Port POS User & Installation Manual 23 Click on the calendar icon to be able to choose the From or To date. Click the Interval search button in order to return to Time span search. Note that in the From/To and the Time span modes, time and dates in the future cannot be specified. If a date in the future is selected, your time and date will be adjusted to the current date and time. 3. Select POS tab. POS Search Tab Screen 4. Enter or select the search criteria by: a.
Serial Port POS User & Installation Manual 24 Creating a search string or search criteria is Google alike. Please read below which options are available: A search string is by default considered to be a set of separate words that are search in an AND way. Search results will include the tickets that contain all words, but not necessarily in that order. Typing the word “AND” is not needed. Search is not case sensitive.
Serial Port POS User & Installation Manual 4.2 Handling POS Transactions The POS Menu of the Video Browser application allows you to view real time video of a camera together with its tickets. When a ticket is generated where the selected camera is configured to record, the ticket will be shown in real time till a new ticket enters which is associated to the selected camera. The Alarm Component has to be installed to see the menu.
Serial Port POS User & Installation Manual 26 4.2.1 View Live Camera and Ticket In the POS Screen, you get a list of all the transactions with their associated recordings and tickets. Furthermore you also get the date and time of each POS transaction. To view a POS transaction movie, click on the transaction event link and the movie of the primary camera will be displayed in the video window screen.
Serial Port POS User & Installation Manual 27 4.2.3 Snapshots This WebCCTV feature gives you the opportunity to take snapshots. To create a snapshot, follow the steps below: 1. Choose the frame you want to save and click the button with the camera symbol ). ( 2. Choose the desired location for storing images and click the Save button. Snapshots are saved in .JPEG format. 4.2.
Serial Port POS User & Installation Manual Full Screen Mode Screen Version 4.