Specifications

PLS63-W Hardware Interface Overview
5.1 Directives and Standards
44
Page 37 of 48
Table 10: Requirements of quality
ETSI EN 301 908-02
V11.1.2
IMT cellular networks; Harmonized Standard covering the essential require-
ments of article 3.2 of the Directive 2014/53/EU; Part 2: CDMA Direct
Spread (UTRA FDD) User Equipment (UE)
ETSI EN 301 489-52
V1.1.0
Electromagnetic Compatibility (EMC) standard for radio equipment and ser-
vices; Part 52: Specific conditions for Cellular Communication Mobile and
portable (UE) radio and ancillary equipment; Harmonized Standard cover-
ing the essential requirements of article 3.1(b) of Directive 2014/53/EU
ETSI EN 301 908-13
V13.1.1
IMT cellular networks; Harmonized Standard covering the essential require-
ments of article 3.2 of the Directive 2014/53/EU; Part 13: evolved Universal
Terrestrial Radio Access (E-UTRA) User Equipment (UE).
Draft ETSI EN 301 489-
01 V2.2.3
Electromagnetic Compatibility (EMC) standard for radio equipment and ser-
vices; Part 1: Common technical requirements; Harmonized Standard cov-
ering the essential requirements of article 3.1(b) of Directive 2014/53/EU
and the essential requirements of article 6 of Directive 2014/30/EU
ETSI EN 301489-19
V2.1.1
ElectroMagnetic Compatibility (EMC) standard for radio equipment and ser-
vices; Part 19: Specific conditions for Receive Only Mobile Earth Stations
(ROMES) operating in the 1,5 GHz band providing data communications
and GNSS receivers operating in the RNSS band (ROGNSS) providing
positioning, navigation, and timing data; Harmonised Standard covering the
essential requirements of article 3.1(b) of Directive 2014/53/EU
ETSI EN 303 413
V1.1.1
Satellite Earth Stations and Systems (SES); Global Navigation Satellite
System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to
1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands; Harmonised
Standard covering the essential requirements of article 3.2 of Directive
2014/53/EU
EN 62368-1:2014 +
A11:2017
Audio/video, information and communication technology equipment -
Part 1: Safety requirements
IEC 60068 Environmental testing
DIN EN 60529 IP codes
EN 62311:2008 Assessment of electronic and electrical equipment related to human expo-
sure restrictions for electromagnetic fields (0 Hz - 300 GHz)
Table 11: Standards of the Ministry of Information Industry of the People’s Republic of China
SJ/T 11363-2006 “Requirements for Concentration Limits for Certain Hazardous Sub-
stances in Electronic Information Products” (2006-06).
SJ/T 11364-2006 “Marking for Control of Pollution Caused by Electronic
Information Products” (2006-06).
According to the “Chinese Administration on the Control
of Pollution caused by Electronic Information Products”
(ACPEIP) the EPUP, i.e., Environmental Protection Use
Period, of this product is 20 years as
per the symbol
shown here, unless otherwise marked. The EPUP is valid only as long
as the product is operated within the operating limits described in the
Hardware Interface Description.
Please see Table 12 for an overview of toxic or hazardous substances or
elements that might be contained in product parts in concentrations
above the limits defined by SJ/T 11363-2006.
Table 9: Standards of European type approval