Specifications

PLS63-W Hardware Interface Overview
1 Introduction
11
Page 6 of 48
1 Introduction
This document
1
describes the hardware of the PLS63-W module. It helps you quickly retrieve
interface specifications, electrical and mechanical details and information on the re-
quirements to be considered for integrating further components.
1.1 Product Variants
This document applies to the following module variants:
•
PLS63-W Module
1.2 Key Features at a Glance
1. The document is effective only if listed in the appropriate Release Notes as part of the technical docu-
m
entation delivered with your product.
Feature Implementation
General
Frequency bands PLS63-W integrates all the bands required to have a global coverage
across the world (NORAM / LATAM / EMEA /APAC).
GSM class Small MS
Output power (according
to release 99)
Class 4 (+33dBm ±2dB) for GSM850
Class 4 (+33dBm ±2dB) for GSM900
Class 1 (+30dBm ±2dB) for GSM1800
Class 1 (+30dBm ±2dB) for GSM1900
Class E2 (+27dBm ± 3dB) for GSM 850 8-PSK
Class E2 (+27dBm ± 3dB) for GSM 900 8-PSK
Class E2 (+26dBm +3 /-4dB) for GSM 1800 8-PSK
Class E2 (+26dBm +3 /-4dB) for GSM 1900 8-PSK
Output power (according
to Release 99)
Class 3 (+24dBm +1/-3dB) for UMTS 850, WCDMA FDD BdXIX
Class 3 (+24dBm +1/-3dB) for UMTS 850, WCDMA FDD BdVI
Class 3 (+24dBm +1/-3dB) for UMTS 850, WCDMA FDD BdV
Class 3 (+24dBm +1/-3dB) for UMTS 900, WCDMA FDD BdVIII
Class 3 (+24dBm +1/-3dB) for UMTS 1700, WCDMA FDD BdIII
Class 3 (+24dBm +1/-3dB) for UMTS 1900, WCDMA FDD BdII
Class 3 (+24dBm +1/-3dB) for UMTS 2100, WCDMA FDD BdIV
Class 3 (+24dBm +1/-3dB) for UMTS 2100, WCDMA FDD BdI