User's Manual
©QTI Page Revision: F
Form #: 30Z0138 Effective Date: 24 August 2006
5
EMIDS Receiver (MMCR) Programming
Changing the Channel
Button Held in Press and hold the push button in. Turn the ON/OFF
Power On switch Clockwise to the On position.
Low High Medium
Freq Freq Freq
Band Band Band
Chn Chn Chn While in menu mode rotate knob until "Chn" appears.
Press and release Button.
123 H1234 C1234 The channel the receiver is on will appear for 2 seconds. In this example
the channel is "123" for a Low Freq. Band Receiver, "1234" for both the
Medium and High Band Receivers. The Medium and High Band
Receivers, scroll the display from right to left, in order to show all four
digits of the Channel.
0-- H0- C0- After 2 seconds a "0--", "H0-" or "C0-" will appear.
1-- H1- C1- To select a new Channel rotate knob until the first number in the new
channel appears.
11- H11 C11 To select the second number - Press button (the number in the first
position appears in the second position) - rotate the knob until the
desired number is in the second position.
13- H13 C13 In this example "3".
133 133 133 To select the third number - Press button (the number in the second
position appears in the third position, if this is a Medium or High Band
Receiver, the display will scroll left) - rotate the knob until the desired
number is in the third position and press the button.
134 134 134 In this example "4".
skip this 344 344 To select the fourth number - Press button (the number in the third
step for position appears in the fourth position, if this is a Medium or High
low band Band Receiver, the display will scroll left) - rotate the knob until the
desired number is in the fourth position and press the button.
skip this 345 345 In this example "5".
step for
low band The channel is now changed to "134" ("1345" if Medium or High
Band Receiver) - the unit returns to the menu.
AUd AUd AUd After the last number is entered the display will show "AUd" (this
may vary depending upon the position of the knob) - rotate the knob
until "End" is displayed.
End End End Press button - the selected channel will appear briefly, the MMCR is
in the operating mode.
134 H1345 C1345 The new channel number appears for a few seconds Medium and
High Band Receivers scroll the display, so all four digits may be viewed.
--- --- --- Operating mode.