User's Manual

©QTI Page Revision: F
Form #: 30Z0138 Effective Date: 24 August 2006
8
EMIDS Receiver (MMCR) Programming
Setting or Changing the Audio Level
Press and hold the push button in. Turn the ON/OFF switch clockwise to
the ON position.
Release Button – (If already in Menu Mode disregard).
Rotate knob until “AUd” is displayed.
Press button – intermittent beeping starts.
Rotate knob until desired level of audio is reached or “ADJ” is displayed.
Press button
This level is fixed in operating mode.
Return to Menu.
Setting the Backlight Level
Press and hold the push button in. Turn the ON/OFF switch clockwise to
the ON position.
Release Button – (If already in Menu Mode disregard).
Rotate knob until “bl” is displayed.
Press the button – the backlight will come on.
Rotate knob for desired level (0 to 9) – press button.
Return to menu. Backlight fixed at this level.
Setting the Baud Rate
Press and hold the push button in. Turn the ON/OFF switch clockwise to
the ON position.
Release Button – (If already in Menu Mode disregard).
Rotate knob until “SEr” is displayed.
Press button. Rotate knob for desired baud rate (12, 24, 48, 96, OFF)
Press button.
Return to menu. Baud rate is set at 9600.
Antenna
Push Button
RS232
Port
Ear Phone
Jack
On/Off Switch
Volume Control
Menu Selection &
Programming Knob
Button held in
Power On
or (Menu Mode)
Chn
AU
d
2
7
ADJ
AU
d
Button held in
Power On
or (Menu Mode)
Chn
b
l
5
b
l
Button held in
Power On
or (Menu Mode)
Chn
SEr
96
SEr
Note: The push button prompt means to
press the button and then release it.
Press Button.
Volume level will be adjustable at all
times in the operating mode.
or