63cc Petrol Tiller Original Operating Instructions DEPTH STOP THROTTLE CONTROL 36CM WORKING WIDTH/ 23CM WORKING DEPTH TILTABLE GUIDANCE WHEELS 4 TILLER BLADES penetrate the soil automatically and smoothly AFTER SALES SUPPORT UK / IRELAND HELPLINE NO 0151 6491500 REP. IRELAND HELPLINE NO 1890 946244 WEB SUPPORT www.einhell-uk.co.
Contents 03. Safety guide 05. Assembly and Parts list 11. Getting Started 13. Operation 14. Trouble Shooting 16. Declaration of Conformity 17. Guarantee Certificate 02 Helpline No.
1. Safety Information General notes: n Read the operating instructions carefully. Familiarize yourself with the operator controls and proper operation of the machine. n Never allow children or other persons who are not familiar with the operating instructions to use the machine. n Never work in the direct vicinity of persons especially children or animals. n Always keep in mind that the machine operator or user is responsible for accidents involving other persons and/or their property.
Maintenance and storage: n Make sure that all nuts, bolts and screws are tightened securely at all times to ensure that the machine is in a safe working condition. n Never store the machine (with petrol in the tank) inside a building in which petrol fumes could come into contact with open flames or sparks. n Allow the engine to cool before you put the machine in an enclosed area. n In order to avoid fire hazards, keep the engine and exhaust free from all vegetation matter and leaking grease (oil).
1 2 3 Helpline No.
06 4 5 6 7 8 9 Helpline No.
10 11 12 13 14 15 Helpline No.
16 17 18 18a 8 2 1 27 8 18b 27 19 08 19a Helpline No.
20 21 22 23 24 25 Helpline No.
26 10 Helpline No.
Important! When using the equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating manual with due care. Keep this manual in a safe place, so that the information is available at all times. If you give the equipment to any other person, give them these operating instructions as well. We accept no liability for damage or accidents which arise due to nonobservance of these instructions and the safety information. 1.
4. Technical data Engine: 4-stroke engine, 163 ccm Engine rating: 3.3 kW / 4.5 hp Engine working speed: 3600 rpm Working width: 36 cm Tiller blade diameter: 26 cm Forward gear: Starting system: Fuel: Engine oil: Tank capacity: Vibration ahv: 1 Hand pull starter Regular unleaded petrol approx. 0.6 l (10W30) approx. 2.2 l 6.1 m/s2 Weight: 34 kg Spark plug: F7 TC 5. Before starting the equipment 1.
n Check the fuel and engine oil levels and refill or top up if required. n Make sure that the ignition cable is secured to the spark plug. n Check the area immediately around the petrol tiller. 6. Operation n Set the depth stop (4) to the desired depth and secure with the split pin. n Swing the transport wheel up and make sure that the bolt is engaged in the notch in the mount at the front. n Push the petrol fuel tap (Fig. 1/Item A) to the “ON” position. (Push the lever towards the engine).
7.2.3 Changing the oil and checking the oil level (before using the machine) The motor oil is best changed when the motor is at working temperature and the tiller is on a flat surface with the motor level. n Use only engine oil (10W30). n Take out the dip stick (Fig. 24 / Item A). n Open the drain screw (Fig. 24 / Item B) and allow the warm oil to drain into a drip tray. n Close the drain screw again when all the waste oil has been drained.
Please adhere to the following maintenance periods in order to ensure a failure-free operation. Important! Fill in engine oil and fuel before starting up the engine for the first time.