25cc Petrol Hedge Trimmer Original Operating Instructions POWERFUL 25CC 2 STROKE ENGINE. Ideal for medium to large gardens. LONG DUAL ACTION 60CM OVERALL BLADE LENGTH. Large cutting area for efficiency. 28CM TOOTH SPACING. For greater performance and precise finish. EASY PULL STARTING SYSTEM. Quick & easy to start. ROTATING REAR HANDLE. For greater control & comfort. AFTER SALES SUPPORT UK / IRELAND HELPLINE NO 0151 6491500 REP. IRELAND HELPLINE NO 1890 946244 WEB SUPPORT www.einhell-uk.co.
Contents 03. Safety Guide 05. Product Diagrams 10. Technical Data 12. Assembly 16. Declaration of Conformity 17. Product Guarantee Read and follow the operating instructions and safety information before using for the first time. 02 Helpline No.
Safety information: 1. This machine can cause serious injuries. Read the instructions for use carefully to discover how to use it correctly: - preparation - maintenance - starting and stopping the machine Make yourself familiar with all the adjusters on the machine and how to use it properly. 2. Children must never be allowed to use the hedge trimmer. 3. Take care near overhead power cables. 4. Do not use the hedge trimmer when people are nearby, particularly children. 5. Wear suitable clothing.
Additional safety instructions 1. Store the machine in a safe place. Carefully open the fuel tank cap beforehand to release any pressure that may have built up in the tank. 2. Start the machine at least 3 m away from the refueling site to avoid the possible risk of fire. 3. Keep the handles dry, clean and free from the fuel mixture, oil and grease. 4. Do not use any fuel other than that recommended in the instructions for use. Always follow the instructions in the section entitled “Fuel and oil”.
1 4 11 6 13 3 14 1 2 7 15 8 5 17 16 12 9 20 2 10 3 6 13 18 14 19 22 21 7 8 Helpline No.
5 4 5 B 9 06 A 6 7 8 9 Helpline No.
10 11 12 13 14a 14b 22 Helpline No.
14c 15 17 A 16 17 2 3 1 18 19 5 4 08 Helpline No.
20 1. Safety regulations 11. Maintain a distance of at least 15 m from other persons. The corresponding safety information can be found in the enclosed booklet. CAUTION! Read all safety regulations and instructions. Any errors made in following the safety regulations and instructions may result in an electric shock, fire and/or serious injury. Keep all safety regulations and instructions in a safe place for future use. 2. Layout and items supplied (Fig.
3. Proper use 4. Technical data Important. This hedge trimmer is suitable for cutting hedges, bushes and shrubs. Engine type: 2-stroke engine, air-cooled, chrome cylinder IMPORTANT! Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the equipment is used in commercial, trade or industrial businesses or for equivalent purposes. IMPORTANT! The machine is to be used only for its prescribed purpose.
positions facilitate working above head height or in other places with different access. Please note: The rotary handle may only be adjusted when the engine is switched off. 5.2 Fuel and oil Recommended fuels Use only a mixture of normal unleaded petrol and special 2-stroke engine oil. Mix the fuel mixture as indicated on the fuel mixing table. Please note: Do not use a fuel mixture which has been kept for longer than 90 days. Please note: Do not use 2-stroke oil with a recommended mixing ratio of 100:1.
Normal procedure: Let go of the throttle lever and wait until the engine has changed to idling speed. Then set the ON/OFF switch to “Stop” or “0”. 6.4 Practical tips Never allow the machine to run at low speed for starting or for cutting. Cutting for dense growth: The most effective method is to use wide, sweeping movements, guiding the cutting edge of the blade straight through the branches. A slight incline of the blade downwards towards the movement will produce best cutting results.
copper wire brush. Thereafter service the spark plug after every 50 hours of operation. ‘The spark plug is located at the front of the engine by the front handle (Fig. 13). 1. Clip the Hook (Fig. 14A & 14B / Item 22), under the arm of the spark plug boot (Fig. 14C / Item 17) and remove it, by pulling away from the engine (Fig. 13). 2. Remove the spark plug (Fig. 14C) with the supplied spark plug wrench. 3. Assemble in reverse order.
Fertilizers and other chemical garden products often contain substances that accelerate the rate of corrosion of metals. Do not store the machine on or near fertilizers or other chemicals. Restarting 1. Remove the spark plug. 2. Pull the starter cable several times to clean the oil residue out of the combustion chamber. 3. Clean the spark plug contacts or fit a new spark plug. 4. Fill the tank. See the section entitled Fuel and oil. 5.
Please adhere to the following maintenance periods in order to ensure a failure-free operation. Important! Fill in engine oil and fuel before starting up the engine for the first time.