User's Manual

Mounting the Embedded Box PC on the

wall

Mount the Embedded Box PC on a wall by using the mounting brackets. The

brackets secure the Embedded Box PC to the wall.

NOTE: The Embedded Box PC is shipped with only those screws that are

required for securing the two mounting brackets to the back of the

Embedded Box PC.

1 Secure the two mounting brackets to the back of the Embedded Box PC

by using eight M3x8 screws.

NOTE: Torque the screws at 3 to 3.4 kilograms-centimeter (2.6 to

3.0 pounds-inch).

2 Drill four holes in the wall that correspond to the holes on the mounting

bracket.